Get quotes for a used or replacement Škoda Kodiaq coil spring. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used coil spring varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Kodiaq runs as a single generation, with a facelift arriving for the 2021 model year, so there is a potential boundary here that could affect spring dimensions or rates. Springs from pre-facelift cars may or may not interchange with post-facelift ones, and you should confirm compatibility with the breaker against your exact registration before buying. Never assume fitment across a facelift boundary on running gear without checking.
Yes, engine choice can influence suspension tuning on the Kodiaq because heavier or more powerful variants may be set up with different spring rates to manage the extra weight or performance. When contacting a breaker, tell them your exact engine size and variant alongside your registration so they can source the correct spring. Do not assume a spring from a 1.5 TSI car will be a straight swap onto a 2.0 TDI or 2.0 TSI four-wheel-drive model without confirming first.
Trim level alone does not dictate coil spring fitment in the way that engine size or drivetrain does, so a spring from an SE car is not automatically different from one on an SE L just because of badge differences. However, Sportline and vRS models may have been fitted with sport-tuned or lowered suspension, which could mean different spring rates or ride heights — this is something you must confirm with the breaker against your registration rather than assuming. Focus on matching generation, engine, drivetrain, and axle (front or rear) rather than trim name.
Yes, coil springs are a genuine fitment on the Škoda Kodiaq. The front suspension uses MacPherson struts with coil springs, and most Kodiaq variants also use coil springs at the rear, though rear suspension layout can vary with drivetrain — four-wheel-drive models differ from front-wheel-drive ones. Always confirm the correct spring for your specific axle and drivetrain with the breaker.
Almost certainly not — front-wheel-drive and four-wheel-drive Kodiaqs use different rear suspension configurations, meaning the springs are unlikely to be interchangeable, particularly at the rear axle. Even at the front, weight distribution differences between drivetrains can result in different spring specifications. Always tell the breaker your exact drivetrain when sourcing a spring, and confirm against your registration plate.
For front springs you should specify NS (nearside, left) or OS (offside, right), as the springs sit within the strut assembly and some cars have handed components. Rear springs are often not handed but it is still good practice to tell the breaker which corner you need. Always confirm with the breaker using your registration, engine, and drivetrain details to make sure you get the right spring for your exact position and variant.