Need a used Škoda Yeti shock absorber? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two shock absorbers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Also known as: shock.
The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift introduced in 2013 that brought styling and equipment changes but used the same basic platform. Because 2014 sits in the post-facelift period and 2010 in the pre-facelift period, whether the dampers interchange across that 2013 boundary is not something we can confirm as fact — ask the breaker to check both registrations before supplying. Never assume a part will fit without that check.
Yes, it can — larger or more powerful engines add weight to the front of the car, and manufacturers sometimes fit uprated suspension components to suit. When contacting a breaker, give them your exact engine size alongside your registration so they can match the correct spec rather than just the model name. This is especially relevant if you are replacing front dampers on a diesel versus a smaller petrol Yeti.
Trim level — whether your Yeti is an S, SE, Elegance, or Laurin & Klement — does not in itself determine which shock absorbers were fitted; the running gear is driven by engine and platform, not trim name. You may find cosmetic differences on a part pulled from a higher-spec car (different spring colours or dust covers, for example), but these do not affect function. Confirm the engine size and year match and you can source from any trim level with confidence.
For shock absorbers the side absolutely matters: nearside (NS) is the passenger side and offside (OS) is the driver's side, and they are handed components on most cars. Always specify NS or OS clearly when getting a quote from a breaker to avoid receiving the wrong unit. Supplying your registration as well as the side will help the breaker pull the correct part first time.
Within the facelifted Yeti (2013–2017) there may be variations in spring and damper rates depending on specification, and any differences related to sport or lowered suspension cannot be confirmed here as a straightforward swap. Give the breaker your full registration and ask them to verify the suspension spec against your car before they supply the part. This is the safest way to avoid receiving a damper that looks correct but has a different rate.
The four-wheel-drive and two-wheel-drive versions of the Yeti can differ in suspension geometry and ride-height calibration due to the additional weight and drivetrain of the 4x4 variant, so the dampers are not necessarily interchangeable. Always tell the breaker whether your car is 4x4 or 2WD, in addition to the engine size and registration, so they can confirm the correct fitment. Do not assume parts from one drivetrain variant will suit the other.