Findapart

Used Škoda Octavia Engine Mount

Get quotes for a used or replacement Škoda Octavia engine mount. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Octavia engine mount: what matters

Fitment on a used engine mount varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Octavia parts

Used engine mount for other Škoda models

Fitment questions

Will an engine mount from a 2015 Octavia fit my 2019 Octavia?

The Mk3 Octavia ran from 2013 to 2020, with a facelift in 2017, so a 2015 and a 2019 are both within the same generation but sit either side of that facelift boundary. Engine mounts follow the engine code rather than the model year, so if both cars share the same engine code the mount is likely compatible, but whether the facelift brought any ancillary or mounting changes is something you should confirm with the breaker against your registration before buying.

Does the engine mount from a 1.6 TDI fit a 2.0 TDI Octavia?

Engine mounts are specific to the engine fitted, and the 1.6 TDI and 2.0 TDI use different engine codes, different block sizes, and different mounting arrangements, so the mounts are not interchangeable. Always quote your engine code to the breaker — it will be on your V5C or available from a VIN check — as that is the single most reliable way to match the correct mount.

Does trim level matter when buying a used engine mount for a Škoda Octavia?

No — trim level has no effect on engine mount fitment for the Octavia. Whether your car is an S, SE, SE Technology, SE L, or vRS, the mount is determined entirely by engine code, fuel type, and gearbox type, not by what badges or equipment the car has. You may find cosmetic or interior differences between the donor car and yours, but none of those affect whether the mount will fit.

Will a petrol Octavia engine mount fit my diesel Octavia of the same year?

Almost certainly not — petrol and diesel engines in the Octavia use different engine codes and have different block configurations, so their mounts differ in design and position. Always match by engine code rather than fuel type alone, as there are multiple petrol and multiple diesel engines across each generation. Give the breaker your exact engine code to be sure you get the right mount.

Does the Octavia vRS use a different engine mount to the standard Octavia?

The vRS uses a different engine — for example a 2.0 TSI petrol or 2.0 TDI diesel with its own specific engine code — so its mounts will differ from those on a standard 1.0 TSI or 1.5 TSI model even within the same generation. Match on engine code first, then confirm gearbox type (manual or DSG/automatic) as that can also affect which mount is needed. Confirm the specific part against your registration with the breaker before purchasing.

I have a Mk2 Octavia — will a Mk3 engine mount fit it?

The Mk2 Octavia ran from 2004 to 2013 and the Mk3 from 2013 to 2020, and these are entirely different generations with different subframes and engine mounting arrangements, so the mounts are not cross-generation compatible. Even if two cars happen to share a similar engine code across generations, the surrounding mounting geometry differs, and fitment cannot be assumed. Stick to parts sourced from the same generation and confirm the engine code with the breaker.