Need a used Škoda Citigo engine mount? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used engine mount varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Citigo was sold in the UK as a single generation running from 2012 to 2019, with a mild refresh around 2017 but no wholesale platform change during that run. Engine mounts broadly follow the engine code rather than the model year, so a mount from a 2013 car and one from a 2018 car may well interchange if they share the same engine code — but mounting bracket and ancillary details can change quietly mid-production without a formal facelift. Name your engine code (found on your V5 or via a VIN check) when you contact the breaker, and ask them to confirm the part number against your registration before you buy.
The Citigo was offered in both standard 1.0 petrol and the compressed natural gas (CNG) G-TEC variant, and because the CNG version carries additional fuel system weight and has different torque characteristics, the engine mounting arrangement may differ from the straight petrol car. The engine code is the most reliable guide here — the petrol units typically carry codes such as CHY or MPI-family codes, while the CNG variant has its own designation. Always supply your engine code and fuel type to the breaker so they can match the correct mount for your drivetrain.
Trim level does not affect which engine mount you need — the S, SE, and Colour Edition trims all use the same mechanical underpinnings for a given engine and gearbox combination. The mount is determined by your engine code and gearbox type (manual or automated MQ100), not by what the badge on the tailgate says. You may find cosmetic differences between cars from different trim levels, but the mount itself will be identical if the engine codes match.
The Citigo was available with either a five-speed manual gearbox or the single-clutch automated manual (often badged ASG), and the gearbox type can affect which engine mount or gearbox mount is correct. Even if the engine code is the same, the mounting points and bracket design may differ between the two transmission options. Tell your breaker both your engine code and your gearbox type so they can supply the right unit.
Like most small front-wheel-drive cars, the Citigo has several mounts — typically a right-hand (offside) engine mount, a left-hand (nearside) transmission mount, and a lower torque mount or dog bone link — and they are not interchangeable with one another. When you contact a breaker, specify which mount has failed (offside, nearside, or lower) as well as your engine code, so they can pull the correct piece from their donor vehicle. A breaker with the same engine code car will usually be able to advise which mounts they have available from that specific vehicle.
The Citigo received a refresh for the 2017 model year that included interior and trim updates, but the core engine and mounting architecture was carried over from the earlier cars. Mounts from a pre-2017 car sharing the same engine code will often physically interchange, but minor ancillary or bracket changes mid-production mean this is not guaranteed. Confirm fitment with the breaker by quoting your engine code and registration, and ask them to cross-reference part numbers before committing to the purchase.