Need a used Škoda Scala engine mount? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two engine mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Škoda Scala has been produced as a single generation launched in 2019, so there is no major generational boundary to worry about in the way there would be with a model that has had a full redesign. That said, engine mounts are engine-code specific, so the most important thing to check is that the donor car shares the same engine code as yours — you can find this on your V5C or via a VIN check. Bring that code to the breaker and ask them to match it directly rather than going on year alone.
Yes, the Škoda Scala uses conventional rubber engine mounts to secure the engine and gearbox to the subframe, so this is a real and commonly replaced part on this model. All variants — petrol and diesel — use engine mounts, though the specific mount design and bracket configuration will differ depending on which engine is fitted. Make sure you know your engine code before approaching a breaker, as mounts are not universal across the Scala range.
Yes, fuel type matters because the petrol and diesel engines in the Scala are physically different units with different mounting points and different mount geometries. A mount from a 1.0 TSI petrol Scala will not be the correct part for a 1.6 TDI diesel Scala, for example. Always quote your engine code to the breaker — this tells them everything they need to know and removes any ambiguity around fuel type or displacement.
Trim level has no bearing on engine mount fitment — the mount is determined entirely by the engine fitted, not by whether the car is an SE, SE L, or any other trim. Both trims were available with overlapping engine options, so two Scalas of different trims but the same engine code will use the same mounts. The only cosmetic difference you might notice buying from a breaker is that the surrounding area of the engine bay could look slightly different due to optional equipment, but the mount itself will be the same.
The Scala launched in 2019 and both years sit within the same generation, so on the face of it the engines carried over without a complete redesign. However, ancillary and mounting changes can sometimes occur mid-production even within a generation, so you should confirm with the breaker against your specific registration and engine code rather than assuming a 2019 mount will be a straight swap. Giving the breaker your engine code alongside your reg is the safest way to get an accurate answer.
Gearbox type can affect engine mount fitment because the torque characteristics and sometimes the physical layout of the drivetrain differ between manual and automatic (DSG) variants, which can mean different mount specifications are used. It is worth telling the breaker not just your engine code but also your gearbox type so they can check the donor vehicle is a genuine like-for-like match. Never assume a mount from a manual donor will be correct for a DSG car or vice versa without the breaker confirming it.