Need a used Škoda Rapid engine mount? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two engine mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Škoda Rapid ran as a single generation from 2012 to 2019, so a 2013 and a 2016 car share the same basic platform, but fitment of a used engine mount depends primarily on whether both cars share the same engine code rather than the year alone. There were incremental production changes throughout the run, and whether a mount from a 2013 car crosses cleanly to a 2016 car is something you should confirm with the breaker against your exact registration and engine code. Supply your engine code from the V5 or a VIN check and the breaker can match it properly.
Yes — engine code is the single most important detail for engine mount fitment on the Rapid, because different engines (for example the 1.2 TSI, 1.4 TSI, 1.6 TDI, or 1.2 HTP) use different mounts even within the same model year. The engine code is printed on your V5 logbook or can be retrieved with a VIN check, and you should always give this to the breaker alongside your registration. Fuel type and gearbox type (manual or automatic/DSG) can also affect which mounts are used, so pass those details on too.
No — trim level does not affect engine mount fitment on the Škoda Rapid; Active, SE, and Elegance are specification packages that alter interior and cosmetic features, not the engine or its mounting points. What determines the correct mount is your engine code, fuel type, and gearbox type, all of which can vary independently of trim. A mount from an Elegance will fit an Active with the same engine code, so focus on matching those mechanical details rather than the trim badge.
The Rapid received a facelift around 2017 which brought styling and equipment updates, but the underlying engines and drivetrain largely carried over, meaning the engine code remains the primary fitment guide rather than the facelift cut-off. That said, whether a specific mount crosses that 2017 production boundary without any ancillary or bracket differences is not something that can be guaranteed here, and you should confirm this directly with the breaker using both registrations and engine codes. Name the facelift year and your engine code when contacting a breaker and they can check their stock accordingly.
The 1.6 TDI engine is shared across several VAG group models, and in some cases engine mounts do cross between vehicles on the same platform, but the Rapid sits on its own PQ25 platform and the mounting geometry and bracket arrangement may differ from an Octavia or Fabia even with an identical engine code. This is a question best put directly to the breaker, who can cross-reference part numbers against your registration to confirm compatibility. Don't assume a VAG group shared engine means a shared mount without that part-number check.
The Rapid typically has multiple engine mounts — commonly a front or top mount, a rear or gearbox mount, and a lower torque mount — and each position is a different part, so you need to identify which specific mount has failed before searching. Your engine code and gearbox type (manual or DSG) will help the breaker identify the correct mount for each position, as these can vary between drivetrain combinations. Describe the location of the failed mount (near-side, off-side, top, or lower) to the breaker so they can pull the right unit from the donor vehicle.