Get quotes for a used or replacement Škoda Octavia egr valve. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two egr valves are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Octavia has run across four main generations — Mk1 (1996–2004), Mk2 (2004–2013, facelift 2008), Mk3 (2013–2020, facelift 2017), and Mk4 (2020–present) — and the EGR valve is engine-code specific, so what generation the donor car comes from matters enormously. A valve from the same engine code will generally be the more relevant match, but crossing a generation boundary, particularly the Mk2-to-Mk3 or Mk3-to-Mk4 transition, also often means crossing an emissions standard boundary (Euro 5 to Euro 6), which affects EGR system design. Name the exact engine code from your V5 or check it against your registration when speaking to the breaker, as that is the primary fitment check they will run.
EGR valves are fitted to both diesel and petrol Octavia variants, though they are more commonly associated with diesel engines where exhaust gas recirculation plays a larger role in emissions control. Petrol Octavias — particularly those with turbocharged engines such as the 1.4 TSI and 1.8 TSI — can also carry an EGR valve depending on the specific engine code and emissions generation. Confirm with the breaker whether the donor part came from a diesel or petrol engine and check that the fuel type and engine code match your own vehicle exactly.
The Mk2 Octavia ran to 2013 and the Mk3 launched that same year, but these generations span the Euro 5 to Euro 6 emissions boundary, which directly affects EGR system design and calibration. Even where the engine family looks similar on paper — for example, certain 2.0 TDI units appear across both generations — the emissions hardware is not necessarily interchangeable across that boundary. Name the boundary to the breaker, give them both engine codes, and let them confirm whether the specific part numbers cross over before purchasing.
Trim level does not affect EGR valve fitment on the Octavia — the valve is determined by the engine code and emissions standard, not whether the car is an S, SE, SE L, or vRS. The vRS is worth mentioning separately only because it typically uses a higher-output version of the engine (for example a 2.0 TDI 184 or 2.0 TSI 230), which may carry a different engine code from the standard equivalent, so the engine code check still applies. Beyond that, trim differences are cosmetic and have no bearing on which EGR valve you need.
The Mk3 Octavia facelifted in 2017, and while many mechanical components carried over, some engine variants were updated or replaced around that time, which can mean a revised engine code and potentially a different EGR valve. The safest approach is to treat the engine code as your primary guide rather than the facelift year alone, as two 2017-registered Mk3s could have been built before or after the production changeover. Give the breaker your full registration so they can identify the exact engine code and confirm the part matches.
A used EGR valve from a reputable breaker is a common and practical repair choice for the Octavia, and there is no MOT rule that requires the part to be new. What matters for MOT purposes is that the EGR system functions correctly and that the car meets its certified emissions standard, so the donor part must come from a vehicle with the same engine code and the same emissions generation as yours. If your car is Euro 6, fitting a Euro 5 component risks emissions failure, so always confirm the emissions era of the donor vehicle with the breaker before buying.