Findapart

Cheap Škoda Yeti Engine Mount

Compare prices on a used Škoda Yeti engine mount from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Yeti engine mount

A used engine mount that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Yeti parts

Used engine mount for other Škoda models

Fitment questions

Will an engine mount from a 2013 Škoda Yeti fit my 2016 Škoda Yeti?

The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift arriving in 2013 that brought styling and some mechanical updates, so a 2013 and a 2016 Yeti sit either side of that facelift boundary. Engine mounts follow the engine code rather than the model year, so whether a pre-facelift mount crosses to a post-facelift car depends on whether both cars share the same engine code — confirm this with the breaker against both registrations before buying.

Does the engine code matter when buying a used Škoda Yeti engine mount?

Yes — the engine code is the single most important detail for engine mount fitment, more so than the year or trim level. The Yeti was sold with a range of petrol and diesel engines, and mounts are often specific to the engine code because block dimensions and mounting positions differ between units. Your engine code is stamped on the engine itself and also appears on your V5 or a VIN check — give it to the breaker so they can match the part accurately.

Is there a difference between engine mounts on a Škoda Yeti S, SE, or Elegance?

Trim level — whether your Yeti is an S, SE, Elegance, or any other grade — makes no difference to engine mount fitment, as the mounts are determined entirely by the engine and gearbox fitted, not the badge on the tailgate. A breaker will price and match the part on your engine code, fuel type, and whether you have a manual or DSG gearbox, so trim is irrelevant here. Do bear in mind that different trim levels could be ordered with different engines, so two Elegance models from the same year are not automatically the same if one is 1.2 TSI and the other is 2.0 TDI.

Do petrol and diesel Škoda Yetis use the same engine mounts?

No — petrol and diesel engines in the Yeti use different engine mounts because the blocks are physically different and mount in different positions. A 1.2 TSI or 1.4 TSI petrol mount will not be the same as a 2.0 TDI diesel mount, and mixing them up risks a mount that does not locate correctly or cannot be bolted in at all. Always confirm your engine code and fuel type with the breaker to make sure you are getting the right mount for your specific unit.

Will a front-wheel-drive Yeti engine mount fit a four-wheel-drive Yeti with the same engine code?

The Yeti was available in both front-wheel-drive and 4x4 versions, and while the engine code is the primary guide to mount fitment, the drivetrain layout can sometimes influence ancillary mounting arrangements. Whether mounts are interchangeable between FWD and 4WD variants on the same engine is something you should confirm with the breaker against your registration, as production changes of this kind can be hard to verify without checking the specific parts. Give the breaker your engine code alongside your registration and let them cross-reference before purchasing.

My Škoda Yeti is a 2010 — can I use an engine mount from a post-2013 facelift car?

The 2013 facelift is a known boundary in the Yeti's history, and while many mechanical components carried over, whether engine mounts are fully interchangeable across that boundary is not something that can be guaranteed without checking. Your best approach is to supply the breaker with your engine code, gearbox type, and registration, and ask them to verify the mount against a post-2013 donor car with the same engine code. Named generation boundaries like the 2013 facelift can sometimes bring revised mounting hardware, so let the breaker confirm compatibility rather than assuming year-to-year interchangeability.