Get quotes for a used or replacement Škoda Enyaq engine mount. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two engine mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Enyaq is a fully electric vehicle, so it does not have a combustion engine and therefore does not use traditional engine mounts in the conventional sense. Instead, it uses motor mounts or drive unit mounts that secure the electric motor and its associated drive unit to the subframe. If you are looking for one of these electric motor/drive unit mounts, search for 'Enyaq motor mount' or 'Enyaq drive unit mount' rather than 'engine mount', and make clear to the breaker which motor position you need (front, rear, or both on iV80x/RS models).
The Enyaq launched in the UK in 2021, with a facelift arriving in 2023 that brought updated front-end styling and some interior changes. Whether the motor or drive unit mounts cross over between pre-facelift and facelift cars is not certain, as manufacturers sometimes revise ancillary mounting points during a mid-life update. Give your breaker your full registration or VIN so they can match the part precisely to your exact build, rather than relying on year alone.
Yes, this matters significantly. The iV60 and iV80 are single-motor rear-wheel-drive variants, while the iV80x (and RS iV) are dual-motor four-wheel-drive, meaning they have both a front and a rear drive unit, each with their own mounts. A mount from an iV60 or iV80 is unlikely to be compatible with the front motor position on an iV80x, and vice versa, so always tell the breaker exactly which variant you have. Your V5 or a VIN check will confirm the variant and motor configuration.
Trim level itself — whether SE, SE L, Sportline, or RS iV — does not directly determine which motor mount fits, but the drivetrain layout underneath the trim does. The RS iV uses a higher-output dual-motor setup that may have different mounting hardware compared with the standard single-motor variants, so the relevant detail is the drive unit configuration, not the badge or trim name. Confirm the exact motor code and drive unit type with your breaker against your registration to make sure the mount matches your specific setup.
The Enyaq shares its MEB electric platform with the VW ID.4, Audi Q4 e-tron, and CUPRA Born, and there is a reasonable chance that some drive unit mounts are shared across these models. However, differences in body structure, subframe geometry, and production revisions mean you should not assume direct interchangeability without verification. Ask the breaker to cross-reference the part number against your Enyaq's VIN rather than simply assuming platform compatibility guarantees a fit.
Give the breaker your full registration number or VIN, your Enyaq variant (iV60, iV80, iV80x, or RS iV), the model year, and whether you need the front motor mount, rear motor mount, or both. It is also worth noting whether your car is pre-facelift (2021–2022) or facelift (2023 onwards), as mounting details may differ. The more detail you supply upfront, the more confidently a breaker can confirm the correct part before you commit to a purchase.