Findapart

Second Hand Škoda Fabia Engine Mount

Need a used Škoda Fabia engine mount? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Fabia engine mount

No two engine mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Fabia parts

Used engine mount for other Škoda models

Fitment questions

Will an engine mount from a 2008 Fabia fit my 2012 Fabia?

The Fabia Mk2 ran from 2007 to 2014, so both years sit within the same generation, but the real question is whether the engine codes match — mounts are specific to the engine, not just the generation. If both cars share the same engine code (shown on your V5 or a VIN check), fitment is much more likely, but whether mounting ancillaries changed at any point during that production run is something you should confirm with the breaker against your registration before buying.

Does a Fabia Mk1 engine mount interchange with a Mk2?

The Mk1 Fabia ran from 1999 to 2007 and the Mk2 from 2007 to 2014, and these are distinct generations with different platforms, so a straight swap across that boundary is unlikely. Engine code is the key detail — even if two engines share the same code across generations, mounting points on the subframe may differ. Confirm any cross-generation fitment directly with the breaker against your exact registration.

Does the trim level affect which engine mount I need — say, Fabia Classic versus Elegance versus vRS?

Trim level — whether Classic, Comfort, Elegance, Ambition, or vRS — does not determine which engine mount you need; the engine code does. The vRS is worth noting separately because it uses a higher-output engine (such as the 1.4 TSI in the Mk2 vRS) that may use a different mount to the standard 1.4, so make sure the engine codes match rather than just the badge. Confirm the specific mount location you need (nearside, offside, or rear torque mount) with your breaker.

Do I need to know my engine code to buy a used Fabia engine mount, or is the year enough?

The year alone is not enough — engine mounts are matched to the engine, and the Fabia was offered with a wide range of petrol and diesel units across every generation, each potentially using different mounts. Your engine code is printed on the V5 logbook or available via a VIN check, and giving it to the breaker is the single most useful thing you can do. It removes guesswork and means the breaker can pull the right mount from the correct donor vehicle.

Is there a difference between engine mounts for the 1.2 petrol and 1.4 TDI Fabia?

Yes — a diesel engine mount and a petrol engine mount are not the same part, even within the same generation, because the engines are physically different units with different mounting geometries and load characteristics. The 1.4 TDI and 1.2 petrol in the Mk2, for example, use different engine codes and different mounts. Always match on engine code, not just displacement or fuel type, and confirm with the breaker.

My 2016 Fabia needs an engine mount — will parts from a 2013 Fabia fit?

The Mk3 Fabia started in 2015 and the Mk2 ran until 2014, so a 2016 car is Mk3 and a 2013 car is Mk2 — these are different generations on different platforms, and the mounts are very unlikely to be interchangeable. Stick to sourcing from another Mk3 donor vehicle with a matching engine code for the best chance of fitment. Confirm compatibility with the breaker against your registration before purchasing.