Get quotes for a used or replacement Škoda Octavia dual mass flywheel. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used dual mass flywheel varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, but not on every variant — the dual mass flywheel (DMF) is fitted to Octavias with diesel engines and certain turbocharged petrol engines, and is paired exclusively with manual gearbox versions; automatics use a torque converter instead. Naturally aspirated petrol Octavias typically used a conventional single-mass flywheel. So before searching, confirm your fuel type, gearbox type, and engine code, as these three details determine whether your car has a DMF at all.
The Octavia Mk2 ran from 2004 to 2013 (facelift around 2008–2009), while the Mk3 ran from 2013 to 2020 (facelift 2017), and although some VAG group engines span both generations, the DMF specification can differ due to ancillary and mounting changes across that boundary. Your engine code is the critical detail here — two cars sharing the same engine code are far more likely to interchange than two cars sharing only a model name. Confirm compatibility with the breaker against your exact registration and engine code before purchasing.
The engine code is the single most important detail — the DMF follows the engine, not the badge or the year. That said, year still matters within a generation because manufacturers sometimes introduced revised flywheel specifications part-way through production without changing the engine code, so supply your full registration or VIN alongside the engine code when getting quotes. You'll find the engine code on your V5C or via a VIN check, and sharing it with the breaker is the quickest way to get an accurate match.
Trim level — S, SE, SE L, Laurin & Klement, or vRS — does not affect DMF fitment; what matters is the engine code, fuel type, and whether the car has a manual gearbox. The vRS is worth flagging only because it typically comes with a specific high-output engine code that differs from standard SE diesels or petrols, so make sure the engine code matches rather than assuming 'vRS to vRS' is automatically correct. Tell the breaker your trim if you like, but lead with the engine code.
No — diesel and petrol engines produce very different torque characteristics and firing patterns, so their DMFs are engineered to different specifications and are not interchangeable even if the gearbox bolt pattern looks similar. Always match the replacement DMF to the same fuel type and the same engine code as your car. Fitting a diesel DMF to a petrol engine (or vice versa) risks premature failure and potential damage to the gearbox.
Both sit within the Mk3 generation, so an engine code match gives you the best chance of compatibility, but Škoda did make running production changes across the 2017 facelift point that could affect ancillary components. The engine code is your starting point, but you should confirm directly with the breaker against your registration whether the specific flywheel from a post-2017 car will drop straight in to a pre-facelift example. Never assume a facelift and pre-facelift part are identical without that check.