Findapart

Škoda Octavia Wishbone Replacement Parts

Get quotes for a used or replacement Škoda Octavia wishbone. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Octavia wishbone

Used wishbones vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Octavia parts

Used wishbone for other Škoda models

Fitment questions

What generation is my Škoda Octavia and does it affect which wishbone I need?

The Octavia has run across four main generations: Mk1 (1996–2010, though largely replaced from 2004), Mk2 (2004–2013, facelift around 2008), Mk3 (2013–2020, facelift 2017), and Mk4 (2020–present). Generation is the single most important factor for wishbone fitment, as the front subframe and suspension geometry changed significantly between each one. Always tell your breaker which generation you have — or simply give them your registration and they can confirm it directly.

Will a wishbone from a 2016 Octavia fit my 2018 Octavia?

The Mk3 Octavia ran from 2013 to 2020 with a facelift in 2017, so both a 2016 and a 2018 car sit within the same generation but either side of that facelift year. For many running-gear components the pre- and post-facelift parts are shared, but whether the wishbone specifically crosses that 2017 boundary without change is something you should confirm with the breaker against your exact registration, as suspension pick-up points can be revised mid-generation. Give the breaker both the donor and recipient reg to be safe.

Does the engine size matter when buying a used Octavia wishbone?

For the wishbone itself the lower arm geometry is generally consistent across the engine range within a generation, but it is worth mentioning your engine size to the breaker because larger or higher-output engines can sometimes bring uprated suspension components that affect related parts. This is especially relevant if you have a vRS model with its sportier setup. Confirm the exact part number with the breaker against your registration to be sure you are getting the correct arm.

Does it matter whether I have an S, SE, SE L, or vRS — will any Octavia wishbone fit?

Trim level — whether S, SE, SE L, or vRS — does not affect which wishbone you need, as the lower arm is determined by generation and side (NS or OS), not by the specification of the interior or equipment pack. A wishbone pulled from an SE donor will physically be the same item as one from an S or SE L car of the same generation. The only area to stay cautious is the vRS, where sport suspension variants may bring differences to spring and damper rates rather than the wishbone itself — confirm with the breaker if your car has any non-standard suspension setup.

How do I make sure I get the right side — nearside or offside?

Wishbones are handed, so you must specify whether you need the nearside (NS, passenger side, left when sitting in the car) or offside (OS, driver side, right when sitting in the car) when requesting a quote from the breaker. Swapping sides is not possible as the geometry and bolt angles are mirrored. Double-check under the car or on your invoice before ordering — getting the wrong side is the most common avoidable mistake with this part.

Does it matter if the donor car was a hatchback or estate when buying a used Octavia wishbone?

For the Octavia, the front lower wishbone is shared between the hatchback and estate body styles within the same generation, as both use the same front suspension architecture. The body style of the donor car should not affect fitment of the front wishbone, though it is always worth mentioning it to the breaker so they can cross-reference the part number against your registration and confirm compatibility before you commit.