Compare prices on a used Škoda Kamiq heater matrix from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used heater matrix varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Škoda Kamiq was launched in 2019 and received a facelift in 2021, so a 2019 matrix and a 2023 matrix sit either side of that boundary. Within the same pre-facelift (2019–2021) or post-facelift (2021 onwards) generation the matrix is very likely to interchange, but crossing the 2021 facelift boundary introduces a risk of differences in the heater box and pipe connections. Confirm the exact part number against your registration with the breaker before buying.
No — the heater matrix sits inside the cabin's heater box and carries coolant regardless of which engine is under the bonnet, so engine size and type do not affect which matrix you need. What matters is the generation (pre-facelift 2019–2021 or post-facelift 2021 onwards), so match on that basis. A breaker will confirm compatibility using your registration plate.
Trim level does not affect the heater matrix itself; it is a mechanical coolant-to-air heat exchanger buried in the dashboard and is the same unit across S, SE, SE L, and Sportline trims within the same generation. You may find the surrounding heater box or dashboard trim differs between trims when you come to refit, but the matrix core should be the same part. Stick to matching generation rather than worrying about trim level.
Yes, all standard Škoda Kamiq variants — petrol and diesel — use a conventional coolant-fed heater matrix as the primary cabin heat source. There is no heat-pump-only setup on the standard Kamiq; that technology is associated with some fully electric vehicles, which the Kamiq (as distinct from the Enyaq) is not. So a used heater matrix is a genuine and correct part to source for this car.
Ask the breaker to confirm the part came from the same generation as your car (pre-facelift 2019–2021 or post-facelift 2021 onwards) and check that both coolant inlet and outlet pipes are undamaged, as bent or corroded stubs will cause the same leak on the new unit. Heater matrix replacement on the Kamiq typically requires significant dashboard removal, so factor in professional fitting costs. Always quote your registration to the breaker so they can cross-reference the part number accurately.
This is a boundary-year question because the Kamiq facelift arrived in 2021, meaning some 2021 cars are pre-facelift and some are post-facelift. If both cars are confirmed post-facelift the matrix is very likely the same, but if one is pre-facelift and the other is post-facelift there may be differences in the heater box housing or pipe positions. Give the breaker both registrations so they can check the exact build dates and part numbers before you commit.