Findapart

Used Škoda Kamiq Water Pump

Get quotes for a used or replacement Škoda Kamiq water pump. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Kamiq water pump: what matters

Fitment on a used water pump varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Kamiq parts

Used water pump for other Škoda models

Fitment questions

Does the Škoda Kamiq have a water pump?

Yes, all petrol and diesel variants of the Škoda Kamiq have a water pump, as it is a liquid-cooled engine in every version sold in the UK. The exact pump design varies by engine code, so the engine code is the key detail when sourcing a used unit from a breaker.

Will a water pump from a 2019 Škoda Kamiq fit my 2022 Kamiq?

The Kamiq launched in the UK in 2019 and received a facelift in 2021, so a 2019 car is pre-facelift and a 2022 car is post-facelift. Even within the same generation, what drives fitment is the engine code rather than the model year, so check both your V5 or a VIN check for your engine code and ask the breaker to match it precisely, as ancillary and mounting changes can occur across the facelift boundary.

Does the engine code really matter, or is the year enough when buying a used Kamiq water pump?

The engine code matters above everything else. The Kamiq was offered with multiple petrols and a diesel across its range — including 1.0 TSI and 1.5 TSI petrol units and a 1.6 TDI diesel — and each uses a different water pump. A year alone is not enough because different engines were available in the same year, so always supply your engine code (found on your V5 or via a VIN check) to the breaker.

Does trim level affect which water pump I need — for example, does an SE fit differ from an SE L or Monte Carlo?

No, trim level does not affect water pump fitment on the Kamiq. The SE, SE L, and Monte Carlo trims are distinguished by cosmetic and equipment differences, not by mechanical changes to the cooling system. What matters is your engine code, so a pump from a Monte Carlo and one from a base SE with the same engine code should be the same unit — confirm this with the breaker against your registration to be certain.

I have a 1.0 TSI Kamiq — will a water pump from a SEAT Arona or VW T-Cross with the same engine code fit?

The Kamiq shares the MQB-A0 platform with the SEAT Arona and VW T-Cross, and where engine codes match exactly, the water pump is often the same part. However, ancillary and mounting details can vary between brands or model years, so always confirm with the breaker using both your registration and engine code before purchasing a cross-platform unit.

Is there anything special about sourcing a water pump for a Kamiq 1.5 TSI compared to the 1.0 TSI?

The 1.5 TSI and 1.0 TSI are different engines with different water pump designs, so they are not interchangeable. The 1.5 TSI unit in particular should be matched by its exact engine code, as variants of the 1.5 TSI engine family have been updated over time and subtle differences may exist. Always provide your engine code to the breaker rather than relying on engine size alone.