Compare prices on a used Škoda Kamiq engine wiring loom from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used engine wiring looms vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Škoda Kamiq launched in the UK in 2019 and received a facelift in 2021, so a 2020 loom comes from the pre-facelift car and a 2022 loom from the facelifted version — these can differ in connector layout and ancillary routing even if the engine code is the same. The engine code is the single most important detail: if both cars share the exact same engine code (found on your V5 or a VIN check), there is a reasonable chance of compatibility within the same generation, but crossing the 2021 facelift boundary introduces additional risk. Confirm the part number and any mid-production ancillary changes directly with the breaker against both registrations before buying.
No — the engine wiring loom is specific to the engine it was built for, and petrol and diesel variants use entirely different looms with different connectors, sensors, and injector wiring. You must match fuel type exactly, and beyond that the engine code (for example 1.0 TSI variants carry codes such as DKLA or DLAA) needs to match your own car's code from the V5 or a VIN check. Supplying your engine code to the breaker is the fastest way to ensure you are quoted the correct loom.
Gearbox type can affect the engine wiring loom because automatic and DSG transmissions often require additional wiring to the gearbox control unit that runs through or alongside the engine loom. Always tell the breaker whether your car is manual or automatic so they can match the correct loom configuration. This is particularly worth checking on the 1.5 TSI engine, which was available with both DSG and manual options in the Kamiq.
Trim level does not affect engine wiring loom fitment — the loom follows the engine code and gearbox type, not the badge on the car. A Monte Carlo or Sportline loom from a car with the same engine code and gearbox type is mechanically the same part as one from an SE or SE Drive. You may find the donor car's interior or body colour differs from yours, but that has no bearing on loom compatibility.
The engine code is printed on your V5C registration document, and it can also be retrieved from a VIN check or by looking at the engine bay — on VAG Group engines it is typically stamped on the block itself. For the Kamiq, common UK codes include 1.0 TSI units such as DKLA and DLAA, and the 1.5 TSI, so quoting this code precisely to the breaker removes most of the guesswork. Always give the breaker your full registration alongside the engine code so they can cross-reference both.
Physically fitting an engine wiring loom is a large job requiring the removal of many components, and while a competent DIY mechanic can manage the physical installation, the more critical issue is that the loom connects to the ECU, which on modern VAG Group vehicles is paired to the car's immobiliser. Whether the replacement ECU and loom combination will require coding or immobiliser work is something you should confirm with the breaker and a VAG-specialist auto electrician before purchasing, as this varies by configuration and is not something we can state as fact here.