Findapart

Cheap Škoda Enyaq Propshaft

Compare prices on a used Škoda Enyaq propshaft from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Enyaq propshaft: what matters

Fitment on a used propshaft varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Enyaq parts

Used propshaft for other Škoda models

Fitment questions

Does the Škoda Enyaq have a propshaft?

Only certain Enyaq variants have a propshaft. The Enyaq is a front-wheel-drive model in its standard single-motor form and has no propshaft at all; a propshaft only exists on the dual-motor four-wheel-drive variants (badged iV 80x or iV 60x), where a second motor drives the rear axle via a short propshaft. If your Enyaq is a single-motor front-wheel-drive version, you will not find a propshaft on it and should check whether another drivetrain component is what you actually need.

My Enyaq is four-wheel drive – is there actually a propshaft to replace, and where is it?

Yes, on the dual-motor 4WD Enyaq there is a propshaft connecting the front and rear drive units. It is a relatively short shaft running between the two electric motor assemblies along the underside of the vehicle. If you are experiencing vibration or a clunking noise on a 4WD Enyaq, the propshaft is a genuine item to investigate, but confirm the fault with a mechanic before sourcing a used part.

Will a propshaft from an early Enyaq (2021-2022) fit a later one – did anything change?

The Enyaq launched in the UK in 2021 and received a facelift for the 2024 model year, so there is a potential boundary to be aware of. Within the pre-facelift range the 4WD propshaft may well carry across, but whether the facelifted 2024-on shaft is interchangeable with the earlier version is not something to assume – confirm this with the breaker against your registration number before buying.

Does the trim level – for example Enyaq Sportline versus standard iV 80x – affect which propshaft I need?

Trim level does not affect propshaft fitment; what matters is whether your Enyaq is the dual-motor 4WD drivetrain variant, not whether it is a Sportline, Suite, or any other trim. A Sportline badge brings cosmetic and interior differences but does not change the drivetrain hardware. So if two cars share the same 4WD motor configuration, the propshaft should be the same part regardless of trim – but always confirm with the breaker using your registration.

I've been quoted a propshaft for a front-wheel-drive Enyaq – could that be right?

No, a front-wheel-drive Enyaq does not have a propshaft, so a quote for one against a single-motor FWD car would be incorrect. It is worth double-checking whether the breaker has quoted the right part for your drivetrain, or whether you actually need something else such as a driveshaft (the shafts running from the motor to the front wheels). Make sure you confirm your car's exact drivetrain with the breaker before proceeding.

What should I check before buying a used Enyaq propshaft from a breaker?

First, confirm your Enyaq is definitely a dual-motor 4WD variant, as only those cars have a propshaft. Give the breaker your full registration so they can match the donor car's drivetrain spec to yours, and ask them to check the propshaft for any signs of damage to the universal joints or centre bearing. Because the Enyaq is a relatively recent model and used stock is limited, also ask whether the part has been inspected since removal.