Get quotes for a used or replacement Škoda Enyaq gearbox mount. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two gearbox mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Enyaq is a fully electric vehicle and does not have a conventional gearbox — it uses a fixed-ratio single-speed reduction drive unit, so there is no traditional gearbox mount of the kind found on petrol or diesel cars. What you may be looking for instead is a motor mount or drive unit mount, which secures the electric motor and reduction unit assembly to the subframe. If you're chasing a vibration or knock, a breaker will be able to advise on which motor mounting components were fitted to your specific variant.
Listings using the term 'gearbox mount' on the Enyaq are almost certainly referring to the electric drive unit mounts or motor mounts, as the Enyaq has no gearbox in the conventional sense. This is a common terminology crossover when sellers apply traditional part names to EV drivetrains. Always confirm with the breaker exactly which mounting component they have and that it corresponds to your registration and drivetrain layout (front-wheel-drive 2WD or the dual-motor 4x4 iV variants), as these differ.
The Enyaq launched in the UK in 2021, with a facelift arriving for the 2024 model year — so a 2023 car sits within the pre-facelift generation alongside 2021-2022 cars. In principle, motor mounts within the same generation and same drivetrain variant (e.g. like-for-like 77kWh rear-wheel-drive) are likely to be compatible, but mounting and ancillary component changes can occur during a production run. Confirm with the breaker against your exact registration and, ideally, your VIN or vehicle identification to be sure.
Trim level itself does not affect motor mount fitment — what matters is the drivetrain layout and motor variant beneath the badge. The Enyaq 60, 80, and 80x use different motor configurations (rear single-motor on 60 and 80, dual-motor on 80x and vRS 4x4), so the mounts will differ between RWD and AWD variants rather than between trim names. Always match the mount to the drivetrain type and motor, not the trim badge, and confirm with the breaker using your registration.
The Enyaq shares the MEB electric platform with the VW ID.4, SEAT Born, and Audi Q4 e-tron, and there is potential parts commonality given they use related motor and reduction unit assemblies. However, whether a specific motor mount crosses between these models depends on the exact motor variant, subframe specification, and production date, and this is not something to assume without checking. Put the question directly to the breaker with both registration numbers and let them compare the part numbers before purchasing.
The most useful things to supply are your full registration number (so the breaker can run a VIN check), whether your car is rear-wheel-drive or the dual-motor 4WD iV variant, and the battery size if you know it (58kWh or 77kWh). Because the Enyaq uses an electric drive unit rather than a conventional gearbox, specifying 'motor mount' or 'drive unit mount' will help the breaker locate the right component more quickly than searching for 'gearbox mount'. The more detail you provide, the more accurately they can match the part to your specific car.