Used Nissan Skyline Track Rod

Yes, all Nissan Skyline variants have track rods (also called tie rods) as part of the front steering rack assembly — this is standard on every generation regardless of engine or drivetrain layout. The Skyline has been rear-wheel drive and four-wheel drive across its generations, and all configurations use a conventional rack-and-pinion steering setup with track rods on both sides. If you are searching for a replacement, make sure you specify your generation and whether you need the nearside (NS) or offside (OS) rod.

The R32 ran from 1989 to 1994 and the R33 from 1993 to 1998, and although they share a family resemblance, the steering geometry and subframe dimensions differ between these two generations, so parts are not considered a straight swap. You should treat these as separate generations and source accordingly. Confirm compatibility directly with the breaker against your exact registration before purchasing.

The R34 Skyline ran from 1998 to 2002 and represents a distinct generation from the R33 (1993–1998), with differences in front suspension geometry that mean track rods are unlikely to interchange directly. Name the generation boundary clearly when speaking to a breaker — sourcing an R34-specific track rod is the safest approach. Always confirm fitment with the breaker against your registration.

For standard track rod replacement, the generation (R32, R33, R34) is the primary fitment factor rather than engine variant in most cases. However, the GT-R's ATTESA four-wheel-drive system and its uprated front suspension may mean different geometry or heavier-duty components compared to the rear-wheel-drive GT-S, so the difference in drivetrain layout is worth flagging. Confirm with the breaker whether they are supplying from a GT-R or GT-S donor car to make sure it matches your vehicle's layout.

Trim level alone does not determine track rod fitment — what matters is the generation and drivetrain layout (two-wheel drive versus four-wheel drive). A GT and a GT-S of the same generation on the same drivetrain layout will use the same track rod. Focus your search on getting the correct generation and side (NS or OS) rather than worrying about trim badges.

Yes — track rods are side-specific, so always state whether you need the nearside (NS, left side as you sit in the car) or the offside (OS, right side) when contacting a breaker. Ordering the wrong side is a common and easily avoided mistake. Give the breaker your registration and generation alongside the side you need to get an accurate quote.