Cheap Nissan NV200 Track Rod
Need a used Nissan NV200 track rod? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Nissan NV200 track rod
A used track rod that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's left or right
Other used Nissan NV200 parts
- Used Nissan NV200 Axle
- Used Nissan NV200 Shock Absorber
- Used Nissan NV200 ABS Pump
- Used Nissan NV200 Brake Servo
- Used Nissan NV200 Instrument Cluster
- Used Nissan NV200 Throttle Body
- Used Nissan NV200 Window Winder Motor
- Used Nissan NV200 Sill
- Used Nissan NV200 Boot Lid
- Used Nissan NV200 Radio
- Used Nissan NV200 Seat Belt
- Used Nissan NV200 CV Joints
Used track rod for other Nissan models
Fitment questions
Does the Nissan NV200 have a track rod, and will I find one at a breaker?
Yes, the Nissan NV200 is a front-wheel-drive van and has a conventional rack-and-pinion steering system, so track rods (also called tie rods) are a genuine part of its steering setup on all variants. You will find both an inner track rod end and an outer track rod end, and UK breakers regularly hold these as common wear items. When contacting a breaker, have your registration to hand so they can confirm the exact specification.
Will a track rod from an early NV200 (2009-2013) fit a later facelift model (2013 onwards)?
The Nissan NV200 was launched in the UK around 2009 and received a facelift in 2013, continuing through to around 2021. The steering geometry is closely related across both phases, but whether a track rod from a pre-facelift van directly interchanges with a post-facelift one is not something to assume — confirm this against your registration with the breaker before ordering, as small steering component updates can occur across a facelift boundary.
Does the engine size affect which track rod I need for my NV200?
On the NV200, the track rod fitment is primarily determined by the van's generation and payload/GVW rating rather than engine size, as the 1.5 dCi diesel is the dominant UK powertrain and the steering geometry does not meaningfully differ between power outputs. That said, always give the breaker your full registration so they can verify the exact part against your van's spec, as minor variants can exist.
Does the payload or GVW rating of my NV200 affect which track rod I need?
The NV200 was sold in different payload configurations, and on vans the GVW rating can influence running gear specifications, so it is worth checking the plate on your van rather than relying solely on the model name. When quoting your job to a breaker, mention both your registration and the GVW shown on your plate to make sure you get the correctly matched part.
Does it matter whether I get a track rod from an NV200 Comfort, SE, or Tekna — will the trim level affect fitment?
Trim level does not affect track rod fitment on the NV200 — the steering components are the same regardless of whether the van is a base Comfort, mid-spec SE, or higher Tekna grade. You may find cosmetic differences between donor vans (colour, interior condition), but these have no bearing on whether the track rod itself will fit your vehicle. Confirm against your registration with the breaker as standard practice.
Do I need to specify nearside (NS) or offside (OS) when ordering a used NV200 track rod?
Yes, track rod ends are handed — the nearside (left, driver's side in a right-hand-drive UK van) and offside (right, passenger side) are separate parts and not interchangeable with each other. When contacting a breaker, make clear which side you need, and provide your registration so they can pull the correct end from the right-hand-drive NV200 donor vehicle.