Cheap Nissan Qashqai Rear Cross Member
Get quotes for a used or replacement Nissan Qashqai rear cross member. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Nissan Qashqai rear cross member
Used rear cross members vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- Confirm body style
- State if it's for 2WD or 4WD
Other used Nissan Qashqai parts
- Used Nissan Qashqai Roof Rack
- Used Nissan Qashqai Rear Light
- Used Nissan Qashqai Sunroof
- Used Nissan Qashqai Towbar
- Used Nissan Qashqai Indicator Stalk
- Used Nissan Qashqai Oil Pump
- Used Nissan Qashqai Aerial
- Used Nissan Qashqai Bonnet Latch
- Used Nissan Qashqai Door Card
- Used Nissan Qashqai Curtain Airbag
- Used Nissan Qashqai Suspension Leg
- Used Nissan Qashqai Airbag Control Module
Used rear cross member for other Nissan models
Fitment questions
What years does the Nissan Qashqai rear cross member fit across?
The Qashqai has two clear generations: the first-generation J10 ran from 2006 to 2013, and the second-generation J11 ran from 2013 onwards, with a facelift arriving in 2017. The rear cross member is a platform-specific structural part, so a J10 item will not cross to a J11 and vice versa. Always confirm the exact generation with the breaker against your registration before ordering.
Will a 2015 Nissan Qashqai rear cross member fit a 2019 model?
Both years sit within the second-generation J11 platform, but the 2019 car is post-facelift (the J11 facelift arrived in 2017) while the 2015 is pre-facelift. The J11 platform is shared across both, which is a positive sign, but whether a specific pressing change affects the rear cross member at that facelift boundary is something you need to confirm with the breaker against your registration rather than assume.
Does the trim level matter when buying a used Qashqai rear cross member — for example, does an Acenta part fit a Tekna?
No, trim level does not affect the rear cross member — the structure is the same whether the car was sold as Visia, Acenta, N-Connecta, or Tekna. You may find cosmetic differences in surrounding trim pieces, but the cross member itself is not trim-specific. Buy confidently on generation rather than worrying about trim level.
Does the Qashqai+2 rear cross member fit the standard Qashqai?
The Qashqai+2 was a seven-seat, longer-wheelbase variant of the first-generation J10, and its extended bodywork means the rear cross member is not the same item as the standard five-seat Qashqai. Always tell the breaker which version you have — standard Qashqai or Qashqai+2 — so they can pull the correct part.
Will a rear cross member from a 2012 Qashqai fit a 2013 model?
This is a generation-boundary question: the first-generation J10 ran to 2013 and the second-generation J11 also began in 2013, so a 2013 car could be either generation depending on when in the year it was registered. A 2012 car is definitively J10, but you must confirm your 2013 car's exact generation with the breaker against your registration before assuming the parts will interchange.
Does it matter whether my Qashqai is two-wheel drive or four-wheel drive when buying a rear cross member?
Drivetrain does not change the rear cross member fitment in the way that generation or body style does — the key variables are platform generation (J10 2006–2013 or J11 2013 onwards) and whether you have a standard Qashqai or the extended Qashqai+2. That said, confirm with your breaker against your registration if you have any doubt, as structural pressing variations can occasionally exist within a generation.