Compare prices on a used Nissan Qashqai towbar from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used towbar that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Qashqai was never factory-fitted with a towbar as standard, but Nissan did approve and offer dealer-fitted and aftermarket towbars as accessories across the model's life, and you'll find used examples removed from real Qashqais at breakers. It's worth knowing the Qashqai has a relatively modest towing capacity (typically around 1,200–1,500 kg braked trailer depending on generation and drivetrain), so the towbar and any wiring harness you source must be rated and approved for your specific version. Always confirm with the breaker that the towbar came off a Qashqai rather than a different Nissan model, as fittings differ.
No — the J10 first-generation Qashqai (2006–2013) and the J11 second-generation Qashqai (2014–2021) are completely different platforms with different rear subframe and bumper arrangements, so the mounting points do not carry over. A towbar is rear-body and chassis dependent, and crossing that 2013–2014 generation boundary means the part will not fit without significant modification. Always buy a towbar that the breaker can confirm came off the same generation as your car.
The J11 second-generation Qashqai received a facelift in 2017 (with further updates in 2019), and while the core platform remained the same, there were changes to the rear bumper pressing that can affect how a detachable or swan-neck towbar head aligns and whether the bumper cut-out matches. The chassis mounting points are broadly similar within the J11 generation, but whether the specific towbar and its bumper trim pieces interchange cleanly across the facelift is something you should confirm with the breaker against your registration. Don't assume a direct swap without checking.
Trim level does not affect towbar fitment on the Qashqai — the rear chassis mounting points are the same across Visia, Acenta, N-Connecta, Tekna, and other trim grades within the same generation. What can vary cosmetically is the rear bumper finish and whether the bumper has a pre-cut aperture for the towbar neck, so a bumper from a higher trim may look slightly different even if the towbar bracket itself fits identically. Focus on matching the generation and ask the breaker whether any bumper trim pieces or tow-plug covers are included with the towbar.
For the towbar bracket and its chassis mounting, drivetrain (2WD versus Nissan's e-4WD system) does not typically affect fitment, as the rear floor and towing mounting points are shared. However, towing capacity does differ between drivetrain variants, so make sure any towbar you buy is rated appropriately for your version's approved limit. Confirm with the breaker that the towbar came off a Qashqai and note whether it includes the wiring loom, as 4WD and 2WD vehicles can have different factory trailer wiring provisions.
No — the X-Trail is a larger vehicle on a different platform with different rear chassis geometry and bumper arrangements, so its towbar will not fit a Qashqai without modification. Although both models share Nissan's family and some platform DNA, the rear-end mounting points are specific to each model. Always source a towbar confirmed to have come off a Qashqai of the correct generation for your car.