Nissan Note Rear Cross Member Replacement Parts
Compare prices on a used Nissan Note rear cross member from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Nissan Note rear cross member
No two rear cross members are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- Confirm body style
- State if it's for 2WD or 4WD
Other used Nissan Note parts
- Used Nissan Note Rear Tailgate
- Used Nissan Note Sunroof
- Used Nissan Note Wheel Arch Liner
- Used Nissan Note Bulkhead
- Used Nissan Note Central Locking Motor
- Used Nissan Note Power Steering Pump
- Used Nissan Note Clutch
- Used Nissan Note EGR Valve
- Used Nissan Note Crankshaft
- Used Nissan Note Window Switch
- Used Nissan Note Fuel Filter
- Used Nissan Note Brake Caliper
Used rear cross member for other Nissan models
Fitment questions
What years does the Nissan Note Rear Cross Member fit – are there different generations to know about?
The Nissan Note ran in two distinct generations in the UK: the first generation (E11) covered 2006 to 2013, and the second generation (E12) ran from 2013 onwards. The rear cross member is a structural body component tied closely to the platform, so a first-generation part will not interchange with a second-generation car. Always confirm the generation against your registration before ordering from a breaker.
Will a rear cross member from a 2008 Nissan Note fit my 2012 Note?
Both a 2008 and a 2012 Note are first-generation E11 models, so they share the same platform and the rear cross member is likely compatible. That said, there were running production changes across the E11's life, so confirm the exact part with the breaker using both registration numbers to be sure. Never assume fitment on a structural chassis component without that check.
Can I use a rear cross member from a pre-2013 Note on my 2014 Note?
A 2014 Note is a second-generation E12, while anything pre-2013 is a first-generation E11 – these are completely different platforms and the rear cross member will not cross over. The 2013 model year marks the generation boundary, so make sure you and the breaker are both working from the correct generation. Confirm with the breaker against your registration to avoid ordering the wrong part.
Does the trim level affect which rear cross member I need – for example, does an Acenta need a different part than a Tekna or Visia?
Trim level does not affect the rear cross member – Visia, Acenta, and Tekna all share the same body structure on a given generation. You may find that higher trims have additional brackets or fixings for sensors or trim pieces in the rear, but the cross member itself is the same pressing. Source from any equivalent-generation car regardless of trim, and mention any ancillary fittings to the breaker so they can include what you need.
Does it matter whether the donor Note had a different engine – say a 1.2 petrol versus a 1.6 or the e-POWER?
Engine choice has no bearing on the rear cross member – the structural body components are the same across the petrol and hybrid drivetrains within the same generation. Focus entirely on matching the generation (E11 2006–2013 or E12 2013 onwards) rather than the engine code. Tell the breaker your registration and let them confirm the exact part number from the donor vehicle.
I've seen a rear cross member listed from a Nissan Note sold in another market – will it fit my UK car?
The Nissan Note was sold under different names and with potential specification differences in various markets, and it is not safe to assume pressing or fitment details are identical even on the same platform. This is exactly the kind of variant question you should route to the breaker, who can compare part numbers against your registration. Stick to UK-sourced parts where possible, and if a breaker is confident of a match they should be able to back it up with part-number verification.