Used Nissan Pulsar Track Rod
Get quotes for a used or replacement Nissan Pulsar track rod. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Nissan Pulsar track rod
Used track rods vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's left or right
Other used Nissan Pulsar parts
- Used Nissan Pulsar Shock Absorber
- Used Nissan Pulsar Subframe
- Used Nissan Pulsar Brake
- Used Nissan Pulsar Brake Caliper
- Used Nissan Pulsar Clutch Slave Cylinder
- Used Nissan Pulsar Window Motor
- Used Nissan Pulsar Wheel Trims
- Used Nissan Pulsar Seat Belt
- Used Nissan Pulsar CV Joints
- Used Nissan Pulsar Engine Mount
- Used Nissan Pulsar Quarter Panel
- Used Nissan Pulsar Parcel Shelf
Used track rod for other Nissan models
Fitment questions
Does the Nissan Pulsar have a track rod?
Yes, all variants of the Nissan Pulsar (C13 generation, sold in the UK from 2014 to 2018) have track rods as part of the front steering assembly, since it is a front-wheel-drive car with a conventional rack-and-pinion steering setup. Both the nearside (NS) and offside (OS) track rods are present and are serviceable parts you can source from a breaker.
Will a track rod from a 2014 Nissan Pulsar fit a 2017 Nissan Pulsar?
The UK Nissan Pulsar ran as a single C13 generation from 2014 through to 2018 with no full model change, so in principle the track rods come from the same basic platform throughout. However, there was a facelift in 2016, and while steering geometry parts often carry over unchanged across a facelift, you should confirm with the breaker that the part number matches your registration before buying, as subtle revisions can occur mid-generation.
Does engine size affect which track rod I need for my Nissan Pulsar?
For the Nissan Pulsar, the track rod is part of the front steering rack assembly and is not typically varied by engine size in the way that brakes sometimes are. That said, the Pulsar was offered with a range of petrol engines including the 1.2 DIG-T turbo and 1.6 DIG-T turbo, so it is worth confirming with the breaker against your exact registration to rule out any variant-specific differences.
Does the trim level affect which track rod fits my Nissan Pulsar — for example, does it differ between Visia, Acenta, N-Connecta, and Tekna?
Trim level does not affect track rod fitment on the Nissan Pulsar — the steering geometry parts are the same across Visia, Acenta, N-Connecta, and Tekna grades. You may find cosmetic differences on parts near the steering area depending on the donor car's specification, but the track rod itself is a mechanical steering component unaffected by trim.
Is the nearside track rod the same as the offside on a Nissan Pulsar?
On many cars the two track rods are identical, but this is not guaranteed — some models use different-length rods on each side due to the steering rack position. Always specify NS or OS when contacting a breaker, and ask them to check the part number against your registration to make sure you get the correct side.
Can I use a Nissan Pulsar track rod from any year between 2014 and 2018?
Because the Pulsar was a single C13 generation sold in the UK from 2014 to 2018, there is a reasonable chance that track rods are interchangeable across those years, but the 2016 facelift means you cannot assume this without checking. Give the breaker your full registration so they can verify the part number matches before you commit to a purchase.