Cheap Nissan Micra ABS Pump

Yes, ABS was available on the Nissan Micra, though it was not standard across every trim level or generation — earlier and more basic variants were often sold without it. From around the K12 generation (2002–2010) onwards, ABS became more widely fitted, particularly on mid and higher trim levels. If you are unsure whether your specific car has ABS, check under the bonnet for the ABS modulator unit on the brake lines, or look for an ABS warning light in the instrument cluster.

No — the K11 (1992–2002) and K12 (2002–2010) are entirely different generations with different brake system layouts, so parts from one will not cross over to the other. You need to match your pump to the correct generation. When contacting a breaker, give them your registration number so they can confirm the exact specification of your car.

It can do, because larger or more powerful engines sometimes use uprated brake systems with different ABS calibration, so a pump from a 1.0 car is not necessarily identical to one from a 1.6. Running gear on the Micra does vary with engine size, so always tell the breaker your exact engine size alongside your registration. This reduces the risk of getting a pump that is physically similar but electronically or hydraulically mismatched.

Trim level itself does not dictate which ABS pump is fitted — what matters is the generation and engine size, not whether the car is badged Visia, Acenta, or Tekna. That said, ABS may not have been standard on the lowest trim levels in some model years, so it is worth confirming your car actually has ABS before ordering. Confirm the exact part against your registration with the breaker to be sure.

The K12 generation ran from 2002 to 2010, so a 2008 and a 2010 car are within the same generation and fitment is more likely to be compatible, subject to engine size matching. A 2011 Micra would be a K13 (the following generation), and crossing that boundary into a different generation is not straightforward — route that question to the breaker with both registrations. Never assume fitment across a generation change without the breaker confirming it against the specific part numbers.

Findapart connects you with UK vehicle dismantlers (breakers) who can source used ABS pumps from salvage Micras. When requesting a quote, include your registration, engine size, and if possible the ABS module part number from your existing unit, as this helps breakers match the correct pump quickly. A good breaker will check the part against your reg before dispatch to give you the best chance of a correct fit.