Compare prices on a used Nissan Micra tyre from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two tyres are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
No – the K11 and K12 Micra are completely different generations with different wheel sizes and bolt patterns, so tyres (and wheels) from one will not cross over to the other. The K12 moved to larger wheel diameters for most variants, meaning the tyre sizes are not interchangeable. Always confirm the exact tyre size you need against your registration plate before approaching a breaker.
No – the K13 and K14 are separate generations and the wheel and tyre sizes differ between them, so you cannot assume a tyre or wheel from one will suit the other. The K14 generally runs on larger diameter wheels than the K13, which changes the tyre profile and fitment entirely. Check the tyre size moulded on your existing tyre sidewall and confirm that size with the breaker.
Trim level does not affect whether the tyre itself fits, but it can affect the wheel diameter and therefore the tyre size fitted as standard – Tekna and higher trims sometimes carry larger alloy wheels than entry-level Visia models within the same generation. This means a tyre from a Visia car may be a different size to one from a Tekna, even if both are the same year and generation. Always match the tyre size (e.g. 175/65 R15) exactly, and confirm with the breaker which trim the donor car was.
On the Micra, engine size has a limited effect on tyre fitment compared with trim level, but some performance-oriented variants within a generation were optionally fitted with larger wheels and therefore different tyre sizes. For everyday 1.0 and 1.2 variants the tyre size is generally consistent within a generation, but it is worth confirming the exact size against your registration rather than assuming all engines share the same fitment. Ask the breaker to check the tyre size on the specific donor vehicle.
The correct tyre size for your Micra is printed on the sidewall of your existing tyres (for example 185/55 R15) and is also listed on the tyre placard, usually found inside the driver's door jamb or fuel filler flap. Quote this full size – width, aspect ratio, and rim diameter – to the breaker so they can match it from a donor vehicle of the correct generation. Never assume a tyre from another Micra generation or a different trim wheel size will be correct without checking.
2010 sits right on the boundary between the K12 (2002–2010) and the K13 (2010–2017), so there is a genuine risk the donor car a breaker offers could be from either generation. The K12 and K13 can use different standard wheel and tyre sizes, so a tyre from one may not match your car even if the year sounds right. Give the breaker your full registration number so they can confirm which generation your car is and match the tyre size correctly.