Nissan Juke Ignition Switch Replacement Parts

It depends on the variant. The first-generation Juke (2010–2019) was available with either a traditional keyed ignition barrel or a push-button start with a key fob, depending on trim level and year of build. If your Juke has a key that physically turns in the barrel, it has a conventional ignition switch; if it has a START/STOP button, it does not use one in the traditional sense, so confirm which system your car has before searching for this part.

Both years fall within the first-generation Juke (2010–2019), which received a facelift around 2014, and there is a reasonable chance the ignition barrel and switch assembly could be compatible within the same generation. However, the facelift may have brought minor changes to steering column components, so you should confirm compatibility against your specific registration with the breaker before purchasing. Never assume fitment across a facelift boundary without verification.

Trim level — whether your Juke is a Visia, Acenta, Tekna, or Nismo — does not determine which ignition switch is fitted; what matters is whether your car has a keyed ignition or a push-button start system. That said, higher trims were more commonly equipped with keyless start, so double-check your car's actual starting system before ordering. A breaker will be able to confirm the correct part against your registration.

The second-generation Juke launched in 2019 and is a completely different platform from the first-generation (2010–2019), so parts from the two generations are not interchangeable. The second-generation Juke also moved heavily toward push-button start across its trim range, making a traditional ignition switch less common on that model. Confirm with a breaker whether the specific unit you are looking at matches your generation and starting system.

No — the ignition switch or barrel assembly is part of the steering column and is not engine-specific, so whether your Juke has the 1.2, 1.6 petrol, or 1.5 diesel engine should not affect which ignition switch is fitted. What does matter is your generation, build year, and whether your car uses a keyed or push-button start system. Confirm the part against your registration with the breaker to be safe.

Tell the breaker your full registration so they can check the exact build spec, particularly whether your Juke uses a keyed ignition barrel or a push-button start, as these are fundamentally different systems. Also check whether the switch comes with the transponder or immobiliser components, as missing these can cause the car not to start even if the part physically fits. Ignition components often need to be paired or coded to the car's ECU, so ask the breaker about this before buying.