Findapart

Nissan 370Z Gearbox Mount Replacement Parts

Get quotes for a used or replacement Nissan 370Z gearbox mount. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Nissan 370Z gearbox mount

Used gearbox mounts vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Nissan 370Z parts

Used gearbox mount for other Nissan models

Fitment questions

Does the Nissan 370Z actually have a gearbox mount?

Yes, the 370Z has a gearbox mount — it is a rear-wheel-drive car with either a 6-speed manual or 7-speed automatic gearbox, and both transmissions use a mount to locate the gearbox within the engine bay. This is a genuine, replaceable part on all variants of the 370Z.

Will a gearbox mount from a 2009 370Z fit a 2013 370Z?

The 370Z ran from 2009 to 2021 in the UK with a facelift introduced around 2013, and while the VQ37VHR engine and basic transmission layout carried through the entire production run, whether mounting hardware changed across that facelift boundary is not something to assume — confirm with the breaker against your registration number before buying.

Does the gearbox mount differ between the manual and automatic 370Z?

The 6-speed manual (sourced from Aisin) and the 7-speed automatic are physically different gearboxes, so their mounts are unlikely to be the same part — always tell the breaker which gearbox type your car has, ideally confirmed from your V5 or a VIN check.

Does the trim level affect which gearbox mount I need — for example, GT versus GT Edition?

Trim level does not affect gearbox mount fitment; the mount follows the engine code and gearbox type, not whether the car is a standard GT or a higher-spec GT Edition. A used mount from a GT will suit a GT Edition mechanically, though confirm the gearbox type (manual or automatic) matches, as that is what actually matters.

What details should I give a breaker when asking for a 370Z gearbox mount?

The most useful information is your engine code (VQ37VHR on all UK 370Zs, but confirm on your V5 or via a VIN check), your gearbox type (manual or automatic), and your registration year. Supplying your full registration number allows the breaker to cross-reference their stock accurately and flag any mid-production mounting changes that may not be publicly documented.

Are 370Z gearbox mounts interchangeable with those from the earlier 350Z?

The 350Z and 370Z use different engines and transmissions, so their gearbox mounts are not a straightforward swap — the 370Z uses the VQ37VHR engine while the 350Z used the VQ35DE or VQ35HR, and the associated gearboxes differ too. Confirm compatibility directly with the breaker before purchasing a 350Z-sourced mount for a 370Z.