Findapart

Mercedes-Benz E-Class Alloy Wheels Replacement Parts

Compare prices on a used Mercedes-Benz E-Class alloy wheels from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Mercedes-Benz E-Class alloy wheels

Used alloy wheelss vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Mercedes-Benz E-Class parts

Used alloy wheels for other Mercedes-Benz models

Fitment questions

Will E-Class alloy wheels from a W212 fit a W213?

The W212 ran from 2009 to 2016 (facelift in 2013) and the W213 from 2016 onwards, so these are separate generations with different specifications. Both generations commonly use a 5x112 PCD and 66.6 mm centre bore, which looks promising on paper, but offset varies across wheel sizes and model years, and crossing a generation boundary like this means you should confirm the exact offset and centre bore against your registration with the breaker before buying.

Do W211 E-Class alloys fit a W212?

The W211 (2002–2009) and W212 (2009–2016) are different generations, and while Mercedes used the 5x112 PCD across both, offsets and centre bore dimensions can differ between them. Because this spans a generation boundary, you should confirm the exact offset and centre bore of any specific wheel against your car's registration with the breaker rather than assume they interchange.

Does the trim level affect which alloy wheels will fit my E-Class — for example, will SE wheels fit an AMG Line?

Trim level does not affect the underlying fitment specification for alloy wheels — PCD, offset, and centre bore are what matter, not whether the car is SE, Sport, AMG Line, or Avantgarde. You can fit wheels from a different trim within the same generation provided those three measurements match, though you may notice cosmetic differences in spoke style, finish, or size if you mix and match trims. Confirm the exact offset with the breaker against your registration to be sure.

Will W212 E-Class facelift alloys fit a pre-facelift W212?

The W212 was facelifted in 2013 but remained the same generation throughout its 2009–2016 run, so the underlying fitment specs — 5x112 PCD and 66.6 mm centre bore — stayed consistent. Pre-facelift and post-facelift W212 wheels generally interchange well, but offset can vary across the range of wheel sizes Mercedes offered across those years, so confirm the specific offset with the breaker against your registration before purchasing.

Can I use alloy wheels from a Mercedes C-Class or S-Class on my E-Class?

Mercedes-Benz uses a 5x112 PCD across many of its models including the C-Class, E-Class, and S-Class, which makes cross-model interchange look attractive. However, centre bore and offset can differ between model lines, and fitting a wheel with the wrong offset can affect handling and cause clearance issues. This is a case where you should always confirm the exact PCD, offset, and centre bore of the specific wheels against your E-Class registration with the breaker before committing.

Do I need to worry about TPMS sensors when buying used E-Class alloys from a breaker?

Many E-Class models are fitted with tyre pressure monitoring systems (TPMS), and used alloys from a breaker may or may not come with sensors still fitted. Whether a sensor from a donor car will be compatible with your car's system depends on the sensor type and your car's generation, and this is not something that can be confirmed by wheel spec alone. Ask the breaker what sensors, if any, are included with the wheels, and confirm compatibility against your registration before buying.