Second Hand Hyundai Kona Washer Pump

The Hyundai Kona first generation ran from 2017 to 2023, with a facelift arriving around 2021, and a washer pump is a standard fitment across all variants in this generation. Pumps within the same generation are very likely to interchange, but whether a pre-facelift (2017–2020) pump crosses cleanly to a post-facelift (2021–2023) car is worth confirming with the breaker against your registration, as connector or housing details can sometimes change at a facelift. Never assume fitment without checking.

No — the washer pump is part of the screen wash system and is not affected by whether your Kona has the 1.0T, 1.6T petrol, or the electric powertrain. All Kona variants, including the EV, use a windscreen wash system and the pump fitment is determined by generation, not drivetrain or engine. Just match the year range and confirm the connector type with the breaker.

Trim level does not affect washer pump fitment on the Hyundai Kona — the underlying pump and plumbing are the same whether the car is an SE, Premium, Premium SE, or N Line. You may find that higher trims have a rear washer pump in addition to the front one, so make sure you're ordering the correct pump (front or rear) for your car. Confirm with the breaker which pump they're supplying if your car has a rear wash-wipe.

Hyundai does use shared components across its range, so there is a reasonable chance of compatibility with other Hyundai models from the same era, but this is not guaranteed and varies by build date and specification. You should give the breaker both registrations and let them cross-reference part numbers before purchasing. Do not assume cross-model fitment without that check.

Yes — the front and rear washer pumps are separate units, typically both mounted on the washer bottle but operating independently. When sourcing a used pump, be clear with the breaker whether you need the front pump, the rear pump, or both, as they are not interchangeable with each other. Confirm which is faulty before ordering to avoid buying the wrong part.

The second-generation Kona launched in 2023 and is a significantly different vehicle to the first generation (2017–2023), so cross-generation fitment of the washer pump is unlikely without careful verification. Part numbers, connectors, and bottle configurations may well differ between the two generations. Always confirm against your registration with the breaker before buying a pump from a different generation car.