Cheap Hyundai Kona Wheel Hub

The first-generation Kona ran from 2017 to 2023, receiving a facelift in 2020 that brought some styling and equipment changes. The wheel hub is tied closely to the suspension and brake package, so hubs from within the same pre- or post-facelift phase are the most reliable match. If you are crossing the 2020 facelift boundary, confirm with the breaker against your exact registration before buying, as brake and hub dimensions can differ between facelifted and pre-facelift cars.

These two cars sit on opposite sides of the 2020 facelift, so there is a real risk of differences in the hub, bearing, and brake arrangement. Name the boundary confidently: pre-facelift is 2017–2019 and post-facelift is 2020 onwards. Whether the specific hub crosses that boundary interchangeably is something you need to confirm with the breaker quoting against your registration, rather than assume it will drop straight in.

Yes, engine size can matter because larger or more powerful engines often use bigger brake assemblies, and the hub is matched to those brakes. The Kona was offered with petrol engines of 1.0 T-GDi and 1.6 T-GDi, as well as the electric powertrain, and the hub and bearing setup can differ across these variants. Always tell the breaker your engine size and registration so they can pull the right unit, and do not assume a hub from a 1.0 will fit a 1.6 or electric model without checking.

Trim level alone does not affect which wheel hub you need — SE, Premium, and Ultimate are equipment and comfort grades, not separate mechanical specifications. The hub fitment is determined by generation, facelift phase, and engine or drivetrain type, not by whether the donor car had heated seats or a bigger infotainment screen. Do be aware that alloy wheel sizes can vary between trims, but the hub and bearing assembly behind them is the same; the breaker will confirm this against your reg.

For a wheel hub the side does not affect fitment in the same way it does for wishbones or driveshafts, as both sides of the Kona use the same hub and bearing unit at each axle. That said, it is always worth mentioning NS or OS when you contact the breaker, as some will have noted the condition of individual corners and it helps them pull the right part quickly. Confirm front or rear as well, since front and rear hubs are not interchangeable.

The Kona Electric shares its basic platform with the combustion-engined Kona but the electric drivetrain and its associated weight and torque characteristics mean the suspension and braking components can differ. It is plausible the hub units are different between Electric and petrol variants, and you should not assume they swap over without checking. Give the breaker your full VIN or registration so they can verify the exact part rather than quoting a generic Kona hub.