Second Hand Hyundai Coupe Washer Pump

The Hyundai Coupe ran across two main generations sold in the UK: the first generation (RD, roughly 1996–2002) and the second generation (GK, roughly 2002–2009). A pump from the RD generation is unlikely to be a straight swap onto a GK-generation car as the mounting, connector and reservoir design differ between these generations. Always quote your registration to the breaker so they can match the correct generation and confirm the plug and fitting are compatible before you buy.

Both of those years sit within the second-generation GK Coupe (2002–2009), so the chances of compatibility are good and breakers will generally treat them as the same family. That said, there was a facelift within the GK run, so confirm with your breaker that the part number and connector type match your specific registration rather than assuming all GK pumps are identical.

No — the washer pump is not affected by whether your Coupe has the 1.6, 2.0, or 2.7 V6 engine. The pump sits on the washer reservoir and serves the windscreen and rear wash system regardless of what is under the bonnet, so you do not need to filter by engine when searching. Focus on the generation (RD or GK) and confirm the connector type with the breaker.

Trim level does not affect washer pump fitment on the Hyundai Coupe — the same pump design is used across SE, S, SIII, and FX trims within the same generation. The only cosmetic difference you might notice is that some trim levels added rear wash, so check whether your car has a rear wiper and washer and tell the breaker, as front-only and front-plus-rear setups can require different pumps or dual-outlet pumps.

The Tiburon is the name used for the same car in other markets, so mechanically they are the same vehicle and the pump from a matching-generation Tiburon may well interchange. However, specification can vary by market, so confirm the part number and connector layout with your breaker against your UK-registered car's details before purchasing.

Tell the breaker your full registration so they can confirm the correct generation (RD 1996–2002 or GK 2002–2009) and whether your car has rear wash in addition to the front, as this affects the pump outlet configuration needed. Also ask them to confirm the electrical connector matches yours, since damaged or incompatible connectors on used parts are a common fitment issue. A reputable breaker will cross-reference the part number against your reg before supplying.