Used Hyundai i20 Windscreen

The second-generation i20 (Mk2) ran from 2014 to 2020, so both years sit within the same generation and the glass shape is the same. However, the key variables are whether your car has an ADAS camera bracket or heated windscreen elements — features that became more common on later Mk2 cars and which need to match your existing setup. Check what's fitted to your car before ordering, and confirm the specific part details with the breaker against your registration to be sure.

No — the first-generation i20 (Mk1) ran from 2008 to 2014, and the second-generation Mk2 ran from 2014 to 2020; these are different platforms with different glass profiles that do not interchange. The Mk1-to-Mk2 boundary is a firm cut-off, so always confirm which generation your car belongs to before sourcing a used screen. A breaker will identify the correct part from your registration.

Trim level does not affect windscreen fitment on the i20 — an SE, Premium, Premium SE or any other trim within the same generation uses the same glass shape. What does matter is whether your car has a heated windscreen or an ADAS camera bracket fitted, as these features vary by specification rather than trim name and the screen must match. Bear in mind a used screen from a lower-spec car may lack heating elements, so check that detail with the breaker.

Look at the top centre of your current screen on the interior side — if your car has a forward-facing camera for lane assist, autonomous emergency braking or similar systems, there will be a bracket or mount bonded or clipped to the glass. A replacement screen must have a matching bracket in the correct position, otherwise the camera cannot be refitted correctly. Confirm the bracket type with the breaker against your registration, as compatibility with your specific ADAS system is something the breaker needs to verify rather than something that can be assumed from the year alone.

Yes — if your i20 has a heated windscreen, the replacement must also have the heating elements built into the glass, as you cannot add them afterwards and an unheated screen will leave you without that function. Conversely, fitting a heated screen to a car not wired for it is harmless but wasteful. Check whether your current screen has fine horizontal lines across it (similar to a rear window) to confirm which type you have, and tell the breaker so they can match it correctly.

These two years fall either side of the Mk1-to-Mk2 generational change, with Mk1 production ending in 2014 and Mk2 beginning the same year, so the glass profiles are different and the screens are not the same part. Sourcing a screen across that generation boundary is not recommended, and a breaker will need your registration to confirm exactly which generation and specification of screen applies to your car. Always verify fitment with the breaker before purchasing a used windscreen.