Used Hyundai Getz Windscreen

The Hyundai Getz was produced as a single generation running from 2002 to 2011, with a facelift introduced in 2005, so there are broadly two windscreen pools to be aware of: pre-facelift (2002–2005) and post-facelift (2005–2011). Whether a windscreen from either phase will cross that 2005 boundary is something you should confirm with the breaker against your registration, as subtle changes around the aperture or fittings can affect compatibility. Never assume a pre-facelift screen drops straight into a post-facelift car without checking.

A 2004 Getz is pre-facelift and a 2007 Getz is post-facelift (the facelift arrived in 2005), so these sit either side of a known model boundary. It is possible there are differences in the aperture seal or trim fittings between the two phases, so you should confirm with the breaker against both registrations before buying. Do not assume they interchange just because the car carried the same Getz nameplate throughout.

No — trim level does not affect windscreen fitment on the Getz, so whether your car is an S, GSi, or CDX, the glass aperture is the same. You may find that a screen pulled from a different trim comes without certain attached brackets or a sunstrip, but the glass itself will fit regardless of spec. Just focus on the model year and whether any heated or ADAS features apply rather than worrying about trim badges.

Some Getz windscreens were available with a heated front screen or a rain sensor port, and fitting a plain unheated screen where a heated one is required — or vice versa — will cause problems. Check your existing screen carefully for the tell-tale printed element strips or a small sensor mounting area at the top before you ask a breaker for a quote. For rain sensor and any camera bracket compatibility with your specific set-up, confirm the details with the breaker against your registration to be sure the replacement matches.

The Getz is an older model produced up to 2011 and ADAS camera systems were not a standard feature of this car, so in practice you are very unlikely to encounter a Getz screen with a factory camera mounting bracket. That said, if your vehicle has had any aftermarket system fitted with a bracket bonded or clipped to the glass, you should flag this to the breaker so they can match the replacement accordingly. For complete peace of mind, always confirm against your registration with the breaker.

The Getz was offered in both 3-door and 5-door body styles, and the windscreen aperture is shared across both variants, meaning the glass itself is the same part regardless of which body style you have. What matters far more is whether the screen is from the pre-facelift (2002–2005) or post-facelift (2005–2011) phase, and whether it matches your car for any heated elements. Confirm the year and any special features with the breaker against your registration before purchasing.