Cheap Hyundai Kona Windscreen

The Hyundai Kona first generation ran from 2017 to 2023, so both a 2018 and a 2022 car sit within the same generation and the glass shape is the same — however, you must check whether both screens carry matching ADAS camera brackets and heating elements, as these features became more common on later first-gen cars and a mismatch will cause problems. Confirm the exact specification of the donor screen with the breaker against your registration before buying.

The first-generation Kona received a facelift in 2020, and while the overall body shell is closely related, the facelift brought updated ADAS provisions and heating options that may not match a pre-facelift screen. Name both the donor year and your own registration when speaking to the breaker, as crossing that 2020 boundary is where compatibility needs to be verified rather than assumed.

Trim level does not affect windscreen fitment on the Kona — the glass shape is the same whether the car is an SE, SE Connect, Premium, or Ultimate. What does matter is whether your car has a heated windscreen or an ADAS camera bracket fitted, which are features more commonly found on higher trims like Premium and Ultimate, so check those specifics rather than worrying about the trim name itself.

Look at the top centre of your current windscreen, just behind the rear-view mirror — if your car has lane-keeping assist, autonomous emergency braking, or similar safety systems, there will typically be a small plastic bracket or housing bonded to the glass to hold the forward-facing camera. A replacement screen must have an identical bracket in the same position; fitting a screen without it, or with a differently positioned bracket, means the camera cannot be recalibrated correctly, so confirm this detail with the breaker using your registration.

A heated windscreen has a fine wire element embedded in the glass and electrical connectors at the edges, so the replacement screen must match your car's heated or unheated specification — you cannot substitute one for the other without wiring changes. When approaching a breaker, state clearly whether your current screen is heated and check that the donor part has connectors in the correct positions to mate with your car's loom.

No — the second-generation Kona launched in 2023 with a redesigned body, so its windscreen is a different shape and is not interchangeable with first-generation (2017–2023) cars. Always confirm the generation of the donor vehicle with the breaker against your own registration to make sure you are comparing like for like.