Hyundai Ioniq Windscreen Replacement Parts

The Hyundai Ioniq was produced as a single generation from 2016, with a facelift arriving for the 2019 model year, so a pre-facelift screen (2016–2018) and a post-facelift screen (2019 onwards) may differ in the way ADAS camera brackets and sensor mounts are positioned around the top of the glass. If your car sits right on that 2019 boundary, confirm the exact build date and ADAS setup with the breaker against your registration before ordering. Never assume a pre-facelift screen will drop straight in if your car carries a forward-facing camera or other windscreen-mounted sensors.

Yes, this is one of the most important things to get right — a heated windscreen has a fine wire element embedded in the glass and a dedicated electrical connector, so it is not interchangeable with a non-heated screen. Check whether your current windscreen has the heating element and make sure you tell the breaker so they can match it correctly. Fitting an unheated screen in place of a heated one will leave you without that function and may cause a dashboard warning.

Trim level — whether SE, Premium, or Premium SE — does not affect windscreen fitment on the Ioniq; the glass itself is the same across trims for the same generation and facelift phase. What does matter is whether the screen has a heated element and whether it carries the correct bracket for any ADAS forward-facing camera your car is equipped with, as higher trims were more likely to include these features. A screen from a lower trim car may fit the aperture perfectly but lack the camera bracket or heating element your car needs, so check those specifics with the breaker.

Look at the top centre of your windscreen on the interior side — if your car has autonomous emergency braking, lane-keep assist, or similar driver-assistance features, there will typically be a plastic bracket or housing bonded to the glass to hold the forward-facing camera. A replacement screen must have an equivalent bracket in the correct position, otherwise the camera cannot be remounted safely. Confirm the bracket type and ADAS system fitted to your specific car with the breaker using your registration, as compatibility with a particular system is something only they can verify against the part they have.

Generation is the starting point — all first-generation Ioniqs share the same basic platform — but the facelift in 2019 brought changes that may affect how ADAS components mount to the glass, so screens from 2016–2018 and those from 2019 onwards are not guaranteed to interchange. Heated versus unheated is a separate check that applies across all years. Give the breaker your registration so they can confirm whether the screen they have matches your build specification before you commit.