Second Hand Fiat Panda Wishbone

The Fiat Panda has run across three generations: the original Mk1 (1980–2003), the Mk2 (2003–2012), and the current Mk3 (2012 onwards). Generation is the single most important factor for wishbone fitment, as the front suspension geometry changed significantly between each one. Always tell your breaker which generation you have, or simply give them your registration and they can confirm.

A 2010 Panda is a Mk2 (2003–2012) and a 2013 is a Mk3 (2012 onwards), so these sit either side of a generation boundary and the wishbones are very unlikely to be interchangeable. Even though the years look close together, the underpinning changed with the new generation. Confirm with your breaker against both registrations before ordering.

For the Panda, engine size can influence front suspension loading, so it is worth telling your breaker whether your car is a smaller-engined variant (such as the 1.0, 1.1, or 1.2) or a larger unit (such as the 0.9 TwinAir or 1.3 Multijet). In practice many wishbones across similar-weight Panda variants share the same part, but your breaker should verify this against your specific engine and registration. Do not assume a part simply labelled 'Panda wishbone' will fit without that check.

Yes — NS (nearside, left) and OS (offside, right) wishbones are handed and will not swap over, so always specify which side you need when contacting a breaker. If you are unsure which side is which, NS is the passenger side and OS is the driver's side in a UK right-hand-drive car. Getting this wrong is one of the most common reasons a used part is returned, so double-check before you order.

Trim level does not affect wishbone fitment on the Panda; Active, Lounge, Cross, and other trim variants within the same generation share the same front suspension geometry. What matters is the generation, engine size, and which side you need — not the badge on the back. One cosmetic difference to be aware of is that parts pulled from a Panda Cross may come with additional underbody protection attached, but the wishbone itself should be the same.

The Mk2 Panda ran from 2003 to 2012, and wishbones listed against that full range will generally apply to the generation as a whole. However, whether a part from early in that run is a straight swap for one from the final year is something you should confirm with the breaker against your registration, as there can be minor running changes within a generation. Giving the breaker your reg is the safest way to make sure you get the right part.