Need a used Škoda Yeti wheel hub? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two wheel hubs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Škoda Yeti ran as a single generation from 2009 to 2017, with a significant facelift in 2013 that updated the styling and some mechanical components. For wheel hubs, the key thing to establish is whether your car is pre-facelift (2009–2013) or post-facelift (2013–2017), as running gear can differ across that boundary. Confirm with the breaker against your registration before buying a hub from the other facelift phase.
A 2011 Yeti is pre-facelift and a 2015 is post-facelift, so they sit either side of the 2013 facelift boundary. While the basic platform is shared, brake and hub specifications can vary across that divide, particularly if the engine sizes differ. Always confirm with the breaker using both registration numbers before assuming the part will cross that boundary.
Yes, engine size is worth checking because larger or more powerful engines are often paired with bigger brakes, which can mean a different hub specification to match. A 1.2 TSI Yeti and a 2.0 TDI 4x4 Yeti may not share the same hub, especially at the rear where drivetrain layout also differs between two-wheel-drive and four-wheel-drive variants. Give the breaker your exact registration so they can match the spec precisely.
Trim level alone does not affect wheel hub fitment on the Yeti; the hub is determined by the generation, facelift phase, engine size, and whether the car is 2WD or 4WD, not by whether it is badged S, SE, Elegance, or Outdoor. That said, be aware that different trim levels may have been sold with different wheel sizes, which is a cosmetic difference that does not change the hub itself. Provide your registration to the breaker and let them match on the mechanical spec rather than the trim name.
Yes, both the axle position and the side matter. Front and rear hubs are entirely different components, and on the front axle the nearside (NS, driver's side in the UK) and offside (OS, passenger's side) hubs are mirror images of each other, so you must specify the correct side when asking a breaker for a quote. Make sure you tell the breaker the exact position — front NS, front OS, rear NS, or rear OS — along with your registration to get the right part.
Yes, the four-wheel-drive Yeti uses a different rear hub to the front-wheel-drive version because the rear axle on the 4WD model is driven, requiring a hub designed to accommodate the driveshaft. The front hubs may also differ between 2WD and 4WD variants depending on brake specification. Always confirm the drivetrain of both the donor vehicle and your own car with the breaker to avoid buying an incompatible part.