Get quotes for a used or replacement Škoda Yeti axle. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used axle varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift introduced in 2013 that brought revised styling and some mechanical updates. For axle fitment the key boundaries are the pre-facelift 2009–2013 cars and the facelifted 2013–2017 cars, so always tell your breaker which phase yours is. Running gear can vary across that 2013 facelift point, so confirm with the breaker whether the axle from a pre-facelift car will cross over to a facelifted one against your specific registration.
Your 2011 car is a pre-facelift Yeti and the 2014 is a post-facelift model, and the 2013 facelift is a recognised boundary where suspension and running gear components can differ. Name that boundary clearly when you contact a breaker, give them both registration numbers, and let them verify whether the specific axle crosses it. Never assume a straight swap across a facelift year without that check.
Yes, engine size can influence axle and braking specifications because heavier or more powerful drivetrains sometimes carry uprated running gear. The Yeti was offered with a range of petrol and diesel engines, and a 2.0-litre four-wheel-drive model may not share the same rear axle as a smaller-engined front-wheel-drive version. Always give the breaker your engine size and drivetrain layout alongside your registration so they can match the correct unit.
Yes, this is one of the most important checks — a four-wheel-drive Yeti has a rear axle with a differential and driveshaft provisions that a front-wheel-drive car simply does not have. Fitting the wrong type is not a case of a minor mismatch; they are fundamentally different assemblies. Tell your breaker explicitly which drivetrain your car has, and confirm it against your registration rather than relying on the badge alone.
Trim level on the Yeti — whether that's the entry-level S, mid-range SE, Elegance, or the Outdoor variant — does not in itself determine axle fitment. What actually matters is the engine size and whether the car is front-wheel drive or four-wheel drive, both of which can vary within the same trim name. One cosmetic difference to be aware of is that Outdoor models have raised ride height, so if there are any damper or spring rate variants associated with that spec, confirm those details with the breaker against your registration rather than assuming they match.
The Yeti shares Volkswagen Group platform architecture with models like the Tiguan, and there can be shared components across the range, but axle specifications vary significantly by vehicle weight, engine tune, and wheelbase. Do not assume a Tiguan or other VAG-group axle will fit without a direct part-number comparison, and route that question to your breaker with both registrations. Cross-model fitment checks are exactly what experienced UK breakers do every day, so give them both vehicles' details and let them confirm.