Need a used Škoda Yeti abs pump? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used abs pump that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Yes, all Škoda Yeti models sold in the UK were fitted with ABS as standard, so every variant carries an ABS pump and modulator unit. The Yeti was produced in one main generation from 2009 to 2017, with a facelift in 2013 that refreshed the styling and updated some running gear. Whether you have a pre-facelift or post-facelift car, the ABS pump is present on all of them.
The 2013 facelift is the key boundary here — the pre-facelift Yeti (2009–2013) and the post-facelift Yeti (2013–2017) may carry different ABS pump and modulator configurations, and crossing that boundary is not straightforward. You should confirm with the breaker whether the unit from a pre-2013 car is compatible with your 2015 car, quoting your registration so they can check the part number. Never assume a direct swap across the facelift year without that verification.
Engine size can influence the braking system specification, as larger or more powerful engines — such as the 2.0-litre TDI — were sometimes paired with uprated brake hardware compared to smaller units like the 1.2 TSI. The ABS pump and modulator calibration can differ between these setups, so you should always tell the breaker your exact engine size and confirm they are matching it. Providing your registration number is the most reliable way to ensure the correct unit is sourced.
Trim level — whether S, SE, Elegance, or any other Yeti grade — does not affect ABS pump fitment, as the braking system is determined by the generation, facelift status, drivetrain, and engine rather than the trim name. You may find cosmetic differences between parts pulled from different spec cars, but the ABS pump itself is not a trim-dependent component. Focus on matching the year range and engine size rather than the trim badge.
Yes, this can matter — the 4WD (4x4) Yeti has an additional rear axle and different brake load distribution compared to the front-wheel-drive version, which can mean different ABS modulator calibration or system configuration. Always tell the breaker whether your Yeti is 2WD or 4WD and confirm the unit they have came from the same drivetrain layout. Quoting your registration is the safest way to ensure the pump matches your car's setup.
Give the breaker your full registration number, your engine size, and confirm whether your Yeti is pre-facelift (2009–2013) or post-facelift (2013–2017), and whether it is 2WD or 4WD. A good breaker will cross-reference the part number from your car's system against the donor unit before selling it to you. This is a safety-critical component, so it is worth taking the time to verify compatibility rather than assuming any Yeti pump will interchange.