Compare prices on a used Škoda Fabia wheel hub from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used wheel hub that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Fabia has run across three main generations: Mk1 (1999–2007), Mk2 (2007–2014), and Mk3 (2014–2021), each with distinct underpinnings, so generation is the single most important thing to get right when sourcing a used wheel hub. Hubs changed between generations because the suspension geometry, bearing sizes, and brake setups are not shared across the ranges. Always tell the breaker your registration so they can pull the exact spec from their records.
Both a 2008 and a 2010 Fabia sit within the Mk2 generation (2007–2014), so they share the same basic platform and a hub from that era is a strong candidate for compatibility. That said, confirm with the breaker against your registration, because engine size can influence brake and hub dimensions — a 1.2 petrol and a 1.4 TDI, for example, may not share the same setup. Never assume fitment without the breaker verifying both donor and recipient specs.
The Mk2 Fabia ran from 2007 to 2014 and the Mk3 from 2014 to 2021, and these are distinct platforms with different suspension and braking architecture, so a hub from one generation will not reliably cross to the other. This is a hard generational boundary and you should not assume interchangeability; a breaker quoting you a Mk2 part for a Mk3 car (or vice versa) would need to confirm a verified match against your registration before you proceed.
Trim level does not determine wheel hub fitment on the Fabia — the hub is part of the running gear, which is dictated by generation and engine size, not by whether the car is badged Ambition, SE, Active, or Monte Carlo. What you may find is that cars in sportier or higher trims were more commonly specified with larger engines, which can mean larger brake assemblies and correspondingly different hubs, but that is an engine-size question rather than a trim question. Tell the breaker your engine size and registration rather than your trim name and they will find the right match.
Yes, engine size is a genuine fitment factor because larger or more powerful engines typically run bigger brakes, and the hub has to be matched to that brake setup. On the Fabia, a smaller 1.0 or 1.2 petrol may carry a different hub to a 1.6 petrol or a diesel, particularly at the front axle. Quote your exact engine size and registration to the breaker so they can cross-reference against the donor vehicle.
The Mk3 Fabia (2014–2021) received a facelift during its production run, and while the core platform remained the same, whether a specific hub crosses that facelift boundary cleanly is something you should confirm with the breaker against your registration rather than assume. Brake specification changes are one of the areas that can shift mid-generation, and a good breaker will check both vehicles' specs before confirming a sale. Name the boundary to the breaker — pre- versus post-facelift Mk3 — and ask them to verify directly.