Findapart

Second Hand Škoda Kodiaq Wheel Hub

Compare prices on a used Škoda Kodiaq wheel hub from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Kodiaq wheel hub

No two wheel hubs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Kodiaq parts

Used wheel hub for other Škoda models

Fitment questions

What years does the Škoda Kodiaq first generation cover, and will parts swap between early and late cars?

The Kodiaq has been sold in the UK as a single generation from its 2017 launch, with a facelift arriving in 2021 that brought styling and equipment updates. Wheel hubs within the pre-facelift (2017–2021) and post-facelift (2021 onwards) periods are likely to share many components given the shared platform, but whether a hub from a pre-facelift car crosses cleanly to a post-facelift one is something you should confirm with the breaker against your registration before ordering.

Does a 2019 Škoda Kodiaq wheel hub fit a 2022 Kodiaq?

The 2019 car is pre-facelift and the 2022 car is post-facelift, so they sit either side of the 2021 facelift boundary. The underpinning MQB platform is shared, which suggests significant carry-over, but brake and bearing specifications can change across a facelift refresh and we can't confirm this swap as fact. Give the breaker both registration numbers and let them check the part numbers before you commit.

Does trim level affect which wheel hub I need — for example, does a Kodiaq SE hub fit an SE L or a Sportline?

Trim level itself — whether SE, SE L, Sportline or vRS — does not determine the hub specification; what matters is the engine fitted and the brake package that goes with it, since larger or more powerful engines often carry bigger brake assemblies with correspondingly different hub dimensions. A hub pulled from an SE car may physically differ from one off a vRS if the brake carrier and bearing size differ, so cross-reference engine size and brake diameter rather than trim name when sourcing. Tell the breaker your engine as well as your trim and they can match accurately.

Does engine size matter when sourcing a used Kodiaq wheel hub?

Yes — heavier braking demands on more powerful variants can mean a larger brake disc and a hub machined to suit, so a hub from a 1.5 TSI car is not guaranteed to match one from a 2.0 TDI or the vRS 2.0 TSI without checking. Always tell the breaker your engine code and capacity alongside your registration so they can confirm the correct hub, particularly for the front axle where brake load is highest.

Does it matter which side I specify — NS or OS — when buying a Kodiaq wheel hub?

On a driven axle the hub assembly is generally symmetrical left to right, but bearing flanges, ABS tone ring orientation and any integrated sensors can make NS and OS hubs non-interchangeable on some variants. Always specify whether you need the nearside (NS, kerb side) or offside (OS, driver's side) hub when contacting a breaker, and ask them to confirm the part number matches your side before despatch.

Will a Škoda Kodiaq wheel hub from a 7-seat model fit my 5-seat car?

The number of seats is a trim and packaging choice rather than a structural one on the Kodiaq, and running gear including wheel hubs is determined by engine size and brake specification, not seating layout. Provided the engine and model year match, the seating configuration should make no difference to hub fitment, though you should still confirm with the breaker using your full registration to rule out any regional or batch variation.