Compare prices on a used Škoda Octavia wheel hub from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used wheel hub that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Mk2 Octavia ran from 2004 to 2013, with a facelift in 2008, while the Mk3 generation started in 2013 – so a 2010 hub comes from a different generation than a 2014 car and the two are unlikely to be interchangeable. You should confirm with the breaker against your exact registration before ordering, as fitting across a generation boundary is not a safe assumption. Never rely on visual similarity alone when it comes to running gear.
Yes, generation matters significantly – the Mk1 (1996–2010, facelift 2000), Mk2 (2004–2013, facelift 2008), and Mk3 (2013–2020, facelift 2017) each use different hub and bearing assemblies tied to their suspension and brake setups. Within a generation there is a reasonable chance of compatibility, but you should still confirm against your registration with the breaker to be sure. Running gear follows platform and powertrain, not just body shape.
Trim level alone does not determine hub fitment, so an SE, SE L, or Elegance badge on the donor car is not something you need to match to your own trim. However, the vRS typically uses larger brakes than standard models, which can mean a different hub carrier or bearing assembly, so engine size and brake spec matter more than the trim name itself. Ask the breaker to confirm the hub spec against your registration rather than relying on trim names.
It can matter, because larger or higher-powered engines are often paired with bigger brakes, and the hub must be matched to the correct brake disc diameter and bearing load rating for your car. A hub from a 1.2 TSI donor, for example, may not be the correct fit for a 2.0 TDI or vRS model even within the same generation. Always quote your registration to the breaker so they can cross-reference the exact specification rather than going on engine size alone.
The Mk3 Octavia facelift arrived in 2017, so a 2016 car is pre-facelift and a 2018 car is post-facelift but both sit within the Mk3 generation (2013–2020). Within a single generation there is a good chance of compatibility, but whether a specific hub crosses the 2017 facelift boundary without issue is something you should confirm with the breaker against both registrations. Mid-generation updates can sometimes bring brake or suspension changes that affect hub spec.
Yes, side can matter for the front axle in particular, as hub and bearing assemblies are sometimes handed due to ABS sensor routing or driveshaft geometry. Always specify NS (nearside, passenger side) or OS (offside, driver side) when contacting a breaker to avoid receiving the wrong unit. Confirm this alongside your registration so the breaker can check the exact part number for your car.