Get quotes for a used or replacement Škoda Karoq wheel hub. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two wheel hubs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Škoda Karoq first generation ran from 2017 onwards, with a facelift arriving around 2021 that brought styling and equipment updates but kept the same basic MQB platform underpinning the running gear. For wheel hubs specifically, the generation boundary matters far more than the facelift year, so a hub from a 2019 Karoq will generally be drawn from the same parts pool as a 2023 car. That said, confirm with the breaker against your exact registration before buying, as brake and hub specifications can vary with engine choice across the range.
The 2021 facelift is a running-change update within the same first-generation Karoq, and the underlying platform architecture was not replaced, so there is a reasonable chance the hub will interchange. However, because the facelift period is a known boundary where suppliers sometimes revised brake and hub specifications alongside other updates, you should confirm compatibility with the breaker using both vehicles' registrations rather than relying on year alone. Never assume fitment across a facelift boundary without that check.
Yes, engine size can affect fitment because larger or more powerful engines are often paired with bigger brake assemblies, and the hub is matched to those brakes. A hub from a 1.0 TSI Karoq may not share the same specification as one from a 2.0 TDI or 2.0 TSI, even in the same model year. Always give the breaker your engine size as well as your registration so they can match the correct hub specification.
Trim level does not affect wheel hub fitment on the Karoq; the hub is determined by the generation, engine, and drivetrain rather than whether the car is an S, SE, SE Technology, or SportLine. You may find that higher trims came with larger alloy wheels as standard, but the hub itself behind the wheel is the same specification for a given engine and axle combination. Bear in mind that a car from a higher trim that was optioned with a larger brake package could be an exception, so confirm with the breaker if you are unsure what brake size your car has.
For the Karoq, front and rear hubs are entirely different parts and are not interchangeable, so you must specify which axle you need. On the same axle, NS (nearside, kerb side) and OS (offside, driver's side) hubs are typically mirror-image components and should be sourced as the correct side. Always tell the breaker both the axle and the side to avoid receiving the wrong part.
The Karoq shares the MQB platform with several Volkswagen Group vehicles including the Tiguan and Kodiaq, so there is some parts commonality across the family. However, the Kodiaq is a larger, heavier vehicle and may carry different brake and hub specifications, and Tiguan variants span different body and engine combinations, so a direct swap is not guaranteed. Route this question to the breaker with the registrations of both donor and recipient vehicles so they can cross-reference the part numbers before you commit.