Compare prices on a used Škoda Yeti body control module from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used body control module that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Škoda Yeti ran from 2009 to 2017, with a facelift introduced in 2013 that brought updates to electrical systems and interior architecture, meaning the BCM specification could differ across that boundary. For Yetis on either side of the 2013 facelift, you should confirm with the breaker that the part number from their donor vehicle matches what your registration requires, as swapping across the facelift line carries a real risk of incompatibility. Never assume a pre-2013 BCM will drop straight into a post-2013 car or vice versa without that check.
Unlike some parts, the BCM on the Škoda Yeti is tied to the vehicle's overall electrical and comfort systems rather than purely to the engine type, so petrol and diesel variants can share the same BCM family within a given build period. That said, certain engine-related options — such as start-stop systems or specific emission-control wiring — may influence the exact BCM variant fitted, so always have your registration to hand when asking a breaker for a quote. Confirm the full part number against your car rather than relying on engine code alone.
The Škoda Yeti was sold in the UK in trims including S, SE, SE L, Elegance, and Scout, and while trim affects equipment levels such as heated seats, parking sensors, or a sunroof, these features are typically managed by the BCM itself rather than requiring a completely different module. In practice, fitting a BCM from a more basic trim into a higher-spec car — or the other way around — may result in certain features not functioning correctly, because the module will have been programmed for a different equipment list. Confirm with the breaker that the donor vehicle's trim and options are as close as possible to yours, and factor in that coding or programming by a VAG-specialist may be needed after fitting.
Yes — Body Control Modules are not plug-and-play units; a used BCM will almost always need to be programmed or coded to your specific vehicle using VAG diagnostic equipment before it will function correctly. This is separate from physically sourcing the right part, so factor in the cost of a specialist or dealer coding session on top of the price of the used module itself. Ask the breaker whether the unit they're supplying has been removed cleanly and whether they can supply any part-number information to assist your coding technician.
A 2012 Yeti is a pre-facelift car, while a 2015 Yeti sits firmly in the post-2013 facelifted generation, and this boundary is significant enough that BCM compatibility across it cannot be assumed. The facelift brought changes to the Yeti's electrical architecture that are likely to mean the modules are not interchangeable without reprogramming difficulty or outright incompatibility. Confirm directly with the breaker, giving them both your registration and the donor vehicle's details, so they can compare part numbers before you commit to buying.
The four-wheel-drive Yeti includes additional systems such as the Haldex rear differential and associated traction control logic that the two-wheel-drive version does not have, and the BCM may be configured differently to manage or communicate with those systems. Fitting a 2WD BCM into a 4x4 Yeti, or the reverse, therefore carries a genuine risk that drivetrain-related functions will not operate as intended. Always confirm with the breaker that the donor vehicle had the same drivetrain layout as yours before purchasing.