Get quotes for a used or replacement Škoda Fabia body control module. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two body control modules are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Škoda Fabia does have a Body Control Module (BCM), sometimes referred to as a convenience control unit or central electronics module in Škoda/VAG diagnostic terminology — it is the same component. It manages functions like central locking, interior lighting, wipers, and other body electronics. When searching or asking a breaker, mentioning both 'BCM' and 'convenience control unit' will help ensure you get the right part.
The Mk1 Fabia (2000–2007) and Mk2 Fabia (2007–2014) are entirely different generations with different electrical architectures, so a BCM from one generation will not fit the other. The BCM is closely tied to the specific vehicle's wiring, software, and control systems, making cross-generation swaps incompatible. Always source a BCM from the same generation as your car.
Trim level can matter with a BCM, because different trims may enable different features such as parking sensors, heated seats, or rain-sensing wipers, which can affect the BCM's software configuration. Unlike purely mechanical parts, fitting a BCM from a lower-spec trim to a higher-spec car (or vice versa) may mean certain functions do not operate correctly even after coding. Confirm with the breaker exactly which trim and options the donor vehicle had against your registration before purchasing.
The Mk2 Fabia received a facelift around 2010–2011, and while the generation is the same, there can be differences in BCM software versions and feature sets across the facelift boundary. Whether a post-facelift BCM will work correctly in a pre-facelift car (or vice versa) is not something that can be confirmed as a general rule — it depends on part numbers and coding compatibility. Check the exact part number with the breaker against your registration to be sure.
The engine itself does not directly determine the BCM you need, as the BCM handles body electronics rather than engine management. However, the broader specification of the car — including what ancillaries were fitted — can influence BCM compatibility, so it is worth telling the breaker your full registration rather than just the engine code. The key factors are generation, build date, and the features equipped on your specific vehicle.
Yes — a used BCM from a breaker will almost certainly need to be coded or programmed to your vehicle using VAG diagnostic equipment such as VCDS or ODIS before it will work correctly. Without coding, features like central locking, windows, and lighting may not function as expected. This is a normal part of the replacement process, so factor in the cost of coding at a VAG-specialist garage when budgeting for the repair.