Need a used Škoda Kamiq body control module? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used body control modules vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Yes, the Škoda Kamiq does have a Body Control Module (BCM), which is the central electronic unit that manages a wide range of body-related functions including lighting, central locking, windows, and wipers. It is fitted across all variants of the Kamiq regardless of engine or trim level. If your Kamiq has an electrical fault affecting multiple systems at once, the BCM is a likely area to investigate.
The Škoda Kamiq launched in the UK in 2019 and received a facelift in 2021, which brought updates to interior electronics and software architecture, so a pre-facelift BCM (2019–2020) and a post-facelift unit (2021 onwards) may not be directly interchangeable. The BCM is software-coded to the vehicle and the updated hardware may not be compatible across that boundary even if it physically fits. We would strongly recommend confirming with the breaker against your exact registration before purchasing.
The BCM itself exists across all Kamiq engine variants — petrol or mild hybrid — so the engine type does not determine whether the car has a BCM. However, the specific software and configuration coded into a BCM can vary depending on which optional features are fitted to the donor car, so a unit from a different spec vehicle may need professional recoding. Always confirm with the breaker that the donor vehicle's registration and spec are as close as possible to yours.
Trim level alone does not determine BCM compatibility in the way that generation or model year does, but it does matter indirectly because higher trims like SE L and Monte Carlo carry additional features such as heated seats, ambient lighting, or upgraded safety systems that the BCM manages. A BCM from a lower-spec S model may lack the configuration for features present on your SE L or Monte Carlo, and vice versa. The safest approach is to source a BCM from a donor car with the same trim level and as close a specification to yours as possible, and always confirm with the breaker.
Yes — a Body Control Module from a used Škoda Kamiq will almost always need to be recoded or programmed to match your vehicle's VIN, key fobs, and feature set, as BCMs are paired to the vehicle they were originally fitted to. This is typically done using VCDS or official Škoda diagnostic equipment and is a job for a specialist or main dealer. Factor the cost of coding into your budget when buying a used unit from a breaker.
The Kamiq, SEAT Arona, and VW T-Cross do share the MQB A0 platform, and some hardware components are common across the group, but BCMs are heavily model-specific and software-coded to each brand's vehicle architecture. It is unlikely that a unit from a different brand will be a straightforward swap, even if it appears physically similar. Confirm directly with the breaker whether they have a Kamiq-specific unit, and do not assume cross-brand compatibility.