Findapart

Second Hand Škoda Enyaq Body Control Module

Get quotes for a used or replacement Škoda Enyaq body control module. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Enyaq body control module

No two body control modules are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Enyaq parts

Used body control module for other Škoda models

Fitment questions

Does the Škoda Enyaq have a Body Control Module (BCM)?

Yes, the Škoda Enyaq is equipped with a Body Control Module — it manages a wide range of electrical functions including lighting, central locking, and window operation. As a fully electric vehicle built on the Volkswagen Group MEB platform, it uses a sophisticated network of control modules, and the BCM is a genuine, standard fitment across all Enyaq variants. If you are sourcing a used one, make sure to quote your exact registration to the breaker so they can match the correct unit.

Will a BCM from a 2021 Škoda Enyaq fit a 2024 facelift model?

This is an important boundary to flag: the Enyaq received a facelift in 2024, which brought updates to lighting systems, interior electronics, and software architecture, and it is not safe to assume a pre-facelift BCM (2021–2023) will be compatible with a post-facelift car. Even within these broad date ranges, VW Group BCMs are often coded to the specific vehicle and software version. Confirm with the breaker against your exact registration before purchasing, as they can check the part number against their donor vehicle.

Does the trim level affect which BCM I need — for example, does a Loft or Suite spec car use a different unit than an iV or Sportline?

Trim level can influence BCM specification on the Enyaq because higher trims like Suite and Sportline may include features such as panoramic roofs, additional lighting functions, or upgraded driver assistance systems that are reflected in the module's programming. Unlike some simpler parts where trim makes no difference, BCMs on complex EVs like the Enyaq tend to be configured to the individual vehicle's option list. Always confirm the donor vehicle's trim and options with the breaker against your own registration to ensure the unit matches your car's equipment level.

Does it matter whether my Enyaq is a rear-wheel-drive or four-wheel-drive (vRS or iV 80x) when sourcing a BCM?

Yes, drivetrain configuration can affect the BCM specification because the module monitors and interacts with powertrain systems, and a dual-motor four-wheel-drive Enyaq (such as the iV 80x or vRS) has different electrical architecture from the single-motor rear-wheel-drive variants. Sourcing a BCM from the wrong drivetrain layout carries a real risk of incompatibility. Give the breaker your exact registration and ask them to match the part number from a like-for-like donor vehicle to be sure.

Can I fit a BCM from a Volkswagen ID.4 or SEAT Born into my Škoda Enyaq, since they share the MEB platform?

In theory, the shared MEB platform means there is some commonality of components across Volkswagen Group's electric models, but BCMs are brand and market-specific and are programmed with vehicle-specific software, so cross-brand fitment is not something that can be confirmed here. Some breakers with VW Group EV expertise may be able to advise whether a donor unit from an ID.4 or Born can be recoded to suit your Enyaq, but this is a specialist question to put directly to them. Do not assume platform-sharing means plug-and-play interchangeability for this type of module.

Does a BCM from a used Škoda Enyaq need coding or programming after fitting?

Yes, almost certainly — BCMs on VW Group vehicles, including the Enyaq, are normally coded to the specific vehicle during manufacture and will require programming to your car's VIN and configuration after fitting. This is standard practice for this type of module and requires specialist diagnostic equipment such as ODIS or a compatible aftermarket tool. Factor in the cost of coding when budgeting for the job, and ask the breaker whether they can supply any documentation or part numbers to assist your technician.