Compare prices on a used Škoda Kodiaq body control module from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two body control modules are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Yes, the Škoda Kodiaq does have a Body Control Module (BCM), sometimes also referred to as a Central Electronics Control Unit or Body Electronics Module in Škoda/VAG terminology. It manages a wide range of functions including lighting, central locking, wipers, and interior electrics. When searching with a breaker, quoting your exact registration will help them identify the correct part number, as VAG group systems can vary in how the BCM is catalogued.
The Škoda Kodiaq was introduced in 2017 and received a significant facelift for the 2022 model year, which brought updated electronics and revised software architecture. Because of these changes, a BCM from the pre-facelift (2017–2021) generation is very unlikely to be a straight swap into a 2022-onward car, and you should confirm compatibility with the breaker against your exact registration before purchasing. Cross-generation BCM fitment on VAG platforms is particularly sensitive to software versioning, so this is not a case where a visual match is enough.
For the Škoda Kodiaq, engine choice can influence which BCM is fitted, as differences between petrol and diesel variants, or between two-wheel-drive and four-wheel-drive (4x4) models, can affect the functions the BCM is expected to manage. Trim level alone — whether that's SE, SE L, Sportline, Scout, or vRS — is less likely to change the fundamental BCM part number, but higher trims with additional features such as panoramic roofs or advanced driver aids may use a differently specced unit. Always confirm against your registration with the breaker rather than relying on trim name alone.
Both 2019 and 2020 Kodiaqs fall within the pre-facelift generation (2017–2021), so there is a reasonable chance of compatibility, but BCMs on VAG platforms are often coded to the vehicle and may require programming to the donor car's configuration. A breaker can confirm whether the part numbers match your registration, and you should be aware that even a matching BCM will typically need to be coded or adapted by a VAG-capable diagnostic system before it functions correctly in your car. Never assume a BCM will work as a plug-and-play swap without professional setup.
The Kodiaq, Tiguan, and SEAT Ateca all share the MQB platform and are built by the VAG group, so there is potential for overlap in BCM part numbers, particularly within the same model year range and specification. However, whether a specific unit from a Tiguan or Ateca will directly suit your Kodiaq depends on the exact part numbers, software versions, and configured features, so this is something you must confirm with the breaker against your registration. Platform sharing does not guarantee a direct swap, and coding will almost certainly be required regardless.
Give the breaker your full registration number, as this allows them to identify the correct part number and check it against their stock. It also helps to let them know your fuel type, drivetrain (2WD or 4WD), and trim level, as these factors can influence which BCM variant is fitted. Bear in mind that a used BCM will usually need programming to your vehicle by a VAG-specialist garage, so factor that into your budget when sourcing the part.