Need a used Škoda Roomster alloy wheels? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used alloy wheels varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Also known as: alloys, rim, rims.
The Škoda Roomster was produced from 2006 to 2015 as a single generation, with a facelift introduced in 2010 that brought minor styling updates. For alloy fitment, what matters is the bolt pattern (PCD), offset, and centre bore rather than the model year alone. The Roomster uses a 5×100 PCD with a 57.1 mm centre bore, so wheels sourced from anywhere in the 2006–2015 run should be compatible provided the offset matches. Always confirm the exact offset against your registration with the breaker before buying.
The Roomster's 2010 facelift did not change the fundamental wheel architecture — the 5×100 PCD and 57.1 mm centre bore remained consistent across both phases. In principle, alloys from a pre-facelift car should bolt straight onto a post-facelift car and vice versa, but offset can vary between different alloy styles fitted across those years. Confirm the specific offset of the wheel you're being offered against your car's registration with the breaker, as running a mismatched offset can affect handling and clearance. Never assume a used set fits purely on year alone.
Trim level does not affect alloy fitment on the Roomster — the PCD, centre bore, and offset are what matter, not whether the donor car was a Scout, Stylus, or any other trim variant. That said, different trims were offered with different factory alloy designs, so a wheel from a Scout may look visually distinct from one on a base-spec car. As long as the PCD (5×100), centre bore (57.1 mm), and offset match, the wheel will fit regardless of which trim it came from. Ask the breaker to confirm the offset of the specific set they have before committing.
Alloys often interchange across Škoda and Volkswagen Group models that share the same 5×100 PCD and 57.1 mm centre bore, which includes various generations of the Fabia and Polo. If a set of Fabia or Polo alloys matches those specs and carries a compatible offset, they will generally bolt onto a Roomster without issue. However, whether a specific offset works with your tyre size and without rubbing is something you should confirm with the breaker against your exact registration. This cross-model interchangeability is a genuine advantage of the VAG platform, but it still needs to be verified rather than assumed.
No — engine size and fuel type have no bearing on alloy fitment for the Roomster. Whether your car is a 1.2 petrol, 1.4 petrol, or 1.6 TDI diesel, the wheel fitment parameters (5×100 PCD, 57.1 mm centre bore, and offset) are the same. You can confidently source alloys from a Roomster with a completely different engine to yours, as long as the offset matches. Confirm the offset with the breaker against your registration to be sure.
If your Roomster is fitted with a tyre pressure monitoring system (TPMS), the sensors mounted inside the wheels of a used set may or may not be compatible with your car's system. TPMS sensor compatibility depends on the sensor frequency, protocol, and whether your car's ECU will accept them, which varies even within the same model. This is not something we can confirm here — ask the breaker directly whether sensors are included and whether they are known to be compatible with your registration. A local tyre fitter or Škoda specialist can also programme or replace sensors if needed.