Findapart

Škoda Yeti Central Locking Motor Replacement Parts

Need a used Škoda Yeti central locking motor? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Yeti central locking motor

A used central locking motor that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Yeti parts

Used central locking motor for other Škoda models

Fitment questions

Does a central locking motor from an earlier Škoda Yeti fit a later one?

The Škoda Yeti was produced from 2009 to 2017, with a facelift arriving in 2013, so there are two distinct phases to consider. Central locking motors do exist on the Yeti, but whether a pre-facelift (2009–2013) unit crosses over to a post-facelift (2013–2017) car is something you should confirm with the breaker against your registration, as door architecture and loom connections can differ across that boundary. Give the breaker your reg and they can check the donor vehicle's details against yours.

Will a central locking motor from a different Škoda model fit my Yeti?

Central locking motors are fitted to the Yeti across its range, and VAG group parts do sometimes share components across models built on the same platform. However, whether a motor from, say, a Škoda Octavia or VW Golf of the same era will physically swap in is something to confirm with the breaker using your registration, as connector types and actuator sizes can vary. Don't assume platform-sharing guarantees a direct fit without checking.

Does the trim level affect which central locking motor I need for my Škoda Yeti?

Trim level — whether your Yeti is an S, SE, Elegance, or Outdoor — does not affect which central locking motor you need, as the locking mechanism is the same across the range. What does matter is the model year and which door the motor is from, since NS (nearside) and OS (offside) units and front versus rear positions may differ. When contacting a breaker, confirm the door position and your registration rather than your trim.

Does it matter whether my Yeti is 4WD or front-wheel drive when buying a central locking motor?

The drivetrain layout — 4WD or two-wheel drive — does not affect the central locking motor, as this is a door-mounted component unrelated to how power is delivered to the wheels. The key details are your model year, which facelift phase your car belongs to (pre-2013 or post-2013), and the door position the motor is fitted to. Provide your registration to the breaker and they will identify the correct unit.

Does it matter which door position the used central locking motor comes from?

Yes, central locking motors are typically specific to their door position — front NS, front OS, rear NS, and rear OS units may not be interchangeable with one another. When you request a quote from a breaker, be clear about which door on your Yeti has the faulty motor to make sure you get the right replacement. A breaker will need your reg and the affected door position to source the correct part.

Is a central locking motor from a pre-facelift 2010 Yeti compatible with a post-facelift 2015 Yeti?

The Yeti facelift in 2013 brought changes to the exterior and interior that could affect door components including locking mechanisms, so crossing that 2009–2013 to 2013–2017 boundary is not straightforward. We cannot state as fact that a 2010 motor will fit a 2015 car without risking an incorrect fitment. Put both registrations to the breaker — the donor and your own — so they can compare the part numbers before you commit to buying.